I need a some help with my guitar, I just changed out the 6th string on my Lashley Le Grande and now I'm having a tuning problem. I started by tuning it up to G# but when I depressed the B pedal the A note was really flat. I tried tuning the B pedal but by the time I got a nice A note the G# was pulled really sharp. I tried several times to tune the string and pedal but each time I came to the same result. I've changed the stings on this guitar before and I've never had any issues. The old string was a wire (I have no idea what gauge or brand it was) while the new one is a SIT Power Flats .020PF nickel semi-flat. Can this be fixed or should I just get a new string? What string type and gauge should I be using on this guitar? I would really appreciate any help as I have a jam with a new band in two days and I'm going to need that 6th sting and B pedal sounding right.
Thanks.
Emmons E9 Strings/Tuning
Moderator: Shoshanah Marohn
- Dave Thimot
- Posts: 29
- Joined: 19 Aug 2007 4:26 pm
- Location: Victoria, British Columbia, Canada
Emmons E9 Strings/Tuning
Last edited by Dave Thimot on 20 Jul 2010 8:55 pm, edited 1 time in total.
Dave
- mike nolan
- Posts: 1255
- Joined: 10 May 2000 12:01 am
- Location: Forest Hills, NY USA
- Contact:
When you replace a plain string with a wound, you will find that you need more travel in the pedal to reach pitch. The string that you replaced was likely a .022 plain that is a much shorter pull. So when you tune the pedal, you are overtuning the open. With no pedal depressed play the 6th string while loosening the tuning nut, you will hear the note going flat back down to pitch.
Try a .022 plain, which will get you back in business. If you really like the wound string, then you will need to adjust the travel on any pedals/levers that activate the 6th string.
Try a .022 plain, which will get you back in business. If you really like the wound string, then you will need to adjust the travel on any pedals/levers that activate the 6th string.
- Dave Thimot
- Posts: 29
- Joined: 19 Aug 2007 4:26 pm
- Location: Victoria, British Columbia, Canada
Thanks for advice, I'm not much of a gearhead I only used the wound string because it just happened to be in my case. I do still have the old string and it's is a plain one and it feels heavier to the touch than the new string. I'll be going to the music store tomorrow for a new .022.
Thanks again.
Thanks again.
Dave
- Brendan Mitchell
- Posts: 1506
- Joined: 26 Nov 2000 1:01 am
- Location: Melbourne Australia
- Willis Vanderberg
- Posts: 2389
- Joined: 13 Mar 2002 1:01 am
- Location: Petoskey Mi