Machine shop steel guitar service Need a part made?
- David Mason
- Posts: 6072
- Joined: 6 Oct 2001 12:01 am
- Location: Cambridge, MD, USA
- Tommy Huff
- Posts: 764
- Joined: 11 Jun 2007 11:45 am
- Location: Texas, USA
marty
Marty, please e-mail me your address or fax# so I can send you a pattern for a part I need......thanx Tommy
- Tommy Huff
- Posts: 764
- Joined: 11 Jun 2007 11:45 am
- Location: Texas, USA
pattern
hi Marty, just checking to see if you recieved the pattern for a part I need......please give me a call or e-mail me a price....thanx Tommy....361-244-3624
-
- Posts: 258
- Joined: 13 Nov 2006 1:01 am
- Location: California
- Tommy Huff
- Posts: 764
- Joined: 11 Jun 2007 11:45 am
- Location: Texas, USA
pattern
Hi Marty, yes it is 2 hrs later here but call and leave me a message with a price and i will call back....thanx Tommy
-
- Posts: 258
- Joined: 13 Nov 2006 1:01 am
- Location: California
Yes I make many Stainless bars, someone was asking for a custom bar.
follllow
http://bb.steelguitarforum.com/viewtopi ... highlight=
follllow
http://bb.steelguitarforum.com/viewtopi ... highlight=
- Roger Guyett
- Posts: 234
- Joined: 3 Jan 2009 2:12 pm
- Location: San Francisco, Ca.
Nice work......
Give Marty a bump .....
Just got some parts for my JCH guitar knee levers - really nice job and very reasonably priced too!
I've inserted a pic of 2 of the knee lever "paddles" (what is the correct name?) he made ...plus a pic of one of them installed.
Just got some parts for my JCH guitar knee levers - really nice job and very reasonably priced too!
I've inserted a pic of 2 of the knee lever "paddles" (what is the correct name?) he made ...plus a pic of one of them installed.
Last edited by Roger Guyett on 16 Oct 2009 3:01 pm, edited 1 time in total.
- Geoff Cline
- Posts: 748
- Joined: 6 Jul 2009 7:36 am
- Location: Southwest France
- Harold Liles Jr
- Posts: 48
- Joined: 12 Oct 2009 9:23 pm
- Location: Denton, Texas USA
Approx cost to fix
I would like a rough estimate to refinish the end caps for my MSA. Pics show the damage.
The abraisions are not very deep but I'd like to get them removed and repolished.
Thanks,
The abraisions are not very deep but I'd like to get them removed and repolished.
Thanks,
Harold Liles
- Tommy Huff
- Posts: 764
- Joined: 11 Jun 2007 11:45 am
- Location: Texas, USA
marty
Marty, please e-mail or call me ...361-244-3624....thanx Tommy
- Tommy Huff
- Posts: 764
- Joined: 11 Jun 2007 11:45 am
- Location: Texas, USA
marty
I am still waiting to hear from you on the truss rod cover I ordered and paid for in September 2009. I really do need this part...my bass is ugly without it...please,please call me 361-244-3624..........Tommy
- Tommy Huff
- Posts: 764
- Joined: 11 Jun 2007 11:45 am
- Location: Texas, USA
marty
I recieved an e-mail from Marty...and hopefully we will get this transaction completed......Tommy
-
- Posts: 258
- Joined: 13 Nov 2006 1:01 am
- Location: California
Hang in there , i just had a mix up, but got a stack out this week.Leg adapters,MSA parts,Titanium bar,Half tone adjuster screws. Tommy I have s claim with your package at PO,so I have started another one because I know its taking toooooo long. I have a pattern now. Sorry bout the PO and delay,if you ever need anything else I will give you a good break for your patience. .
Thank you all
Marty
Thank you all
Marty
-
- Posts: 258
- Joined: 13 Nov 2006 1:01 am
- Location: California
Re: msa parts
as per our email your parts are en route.Paul Wade wrote:marty smith,
been ttying to reach you .you have not sent my m.s.a
parts back to me what is the problem???
here is my cell phone number 608-495-2101
i have paid you for your work
paul wade
usps
Thanks
-
- Posts: 258
- Joined: 13 Nov 2006 1:01 am
- Location: California
Re: Approx cost to fix
Harold can post pics of them now?Harold Liles Jr wrote:I would like a rough estimate to refinish the end caps for my MSA. Pics show the damage.
The abraisions are not very deep but I'd like to get them removed and repolished.
Thanks,
- Wes Hamshaw
- Posts: 143
- Joined: 3 Feb 2004 1:01 am
- Location: Pacific City, Oregon * R.I.P.
leg thread adapters...
Marty just delivered a set of four leg adapters and they are great!
Two different guitars with different thread size for sockets and only one set of legs to use. After contacting makers of legs to be made with different than the usual size treads and receiving no response, I contacted Marty about machining adapters so the legs could fit on both. He did it.
The adapters fit beautifully and were finished to perfection down to the knurled part that you hold onto as you screw the adapter in place. The price was very fare as well.
Marty had some time problems for awhile but it appears that that's in the past.
Thanks Marty for a fine job.....Wes
Two different guitars with different thread size for sockets and only one set of legs to use. After contacting makers of legs to be made with different than the usual size treads and receiving no response, I contacted Marty about machining adapters so the legs could fit on both. He did it.
The adapters fit beautifully and were finished to perfection down to the knurled part that you hold onto as you screw the adapter in place. The price was very fare as well.
Marty had some time problems for awhile but it appears that that's in the past.
Thanks Marty for a fine job.....Wes
- Wes Hamshaw
- Posts: 143
- Joined: 3 Feb 2004 1:01 am
- Location: Pacific City, Oregon * R.I.P.