Fender Volume Pedal Reissue - Scratchy Pots?
Moderator: Shoshanah Marohn
-
- Posts: 29
- Joined: 24 Feb 2009 8:10 pm
- Location: Buffalo, NY
Fender Volume Pedal Reissue - Scratchy Pots?
I bought one of these last November and it already seems to be crapping out on me - total scratchiness already. That doesn't seem right after less than six months.
Anyone else have this problem? Or solutions?
Anyone else have this problem? Or solutions?
well, if it makes you feel any better my goodrich didnt even last 6 weeks let alone 6 months before the pot got all scratchy. i bought a pot from Tom Bradshaw that has wroked flawlessly since. It really sucks that we all just accept that these things are made from crappy foreign parts and reward these companies by continuing to buy their products. if there were any reasonably priced alternative I would jump on it. A VP is just a housing some string and the pot. They charge what I think is an obscene amount of money for such a simple device and they cant even get those minimal components right!!!
sorry, this just peeves me.
my next VP will be a hilton.
sorry, this just peeves me.
my next VP will be a hilton.
-
- Posts: 4818
- Joined: 4 Aug 1998 11:00 pm
- Location: Rehoboth,MA 02769
I ordered a replacement pot for a VP that was scratchy. Before I replaced it, I drilled a hole in the side of the scartchy pot still in the VP, a bit larger than the snoot that snaps into the can of contact cleaner then sprayed the inside of the pot.
I cleaned the outside of the pot with alcohol and put a piece of duct tape over the hole I drilled. It is quiet and has been working for several years and I still have the replacement pot if I need it.
I cleaned the outside of the pot with alcohol and put a piece of duct tape over the hole I drilled. It is quiet and has been working for several years and I still have the replacement pot if I need it.
- Paul Arntson
- Posts: 1372
- Joined: 8 Jun 2004 12:01 am
- Location: Washington, USA
Hi Doug,
I have the Fender reissue vol/tone pedal. A little caig blue contact spray should take care of any scratchy pot issues. As long as Caig takes care of it I never hold a grudge against a slightly noisy potentiometer.
http://www.siber-sonic.com/electronics/caig.html
Sometimes that stuff happens and just needs to be sprayed.
However....
Mine had a crackle I couldn't get rid of by spraying. What I finally found out was there was some crackling due to the flexing of some of the wiring when I actuated the pedal. Re-arranging the wires so they bent differently (wider radius) cured the problem. I posted on that last fall or something..
Of course, if the pot is truly already bad, there's not much to be done except replace it or the whole pedal...And complain lots. Warranty?
Best of luck.
I have the Fender reissue vol/tone pedal. A little caig blue contact spray should take care of any scratchy pot issues. As long as Caig takes care of it I never hold a grudge against a slightly noisy potentiometer.
http://www.siber-sonic.com/electronics/caig.html
Sometimes that stuff happens and just needs to be sprayed.
However....
Mine had a crackle I couldn't get rid of by spraying. What I finally found out was there was some crackling due to the flexing of some of the wiring when I actuated the pedal. Re-arranging the wires so they bent differently (wider radius) cured the problem. I posted on that last fall or something..
Of course, if the pot is truly already bad, there's not much to be done except replace it or the whole pedal...And complain lots. Warranty?
Best of luck.
-
- Posts: 512
- Joined: 27 Aug 2002 12:01 am
- Location: Vallejo California
- Contact:
I would recommend just replacing the carbon track pots with, Tom Bradshaw's Dunlop parts.
Bottom line is, no one makes quality carbon pot anymore.
The Dunlop is the only thing out there that is usable.
I have had one in my pedal now for about 5 years, no problems.
Here is a diagram for both the Vol and Tone, keep in mind this is not the Fender VT specs, its adapted from the Bigsby spec, and will give you a Speedy West, Doo Wah.
Tom, mentioned to me that he may be able to get these pots in 250K.
If that happens, you could then have the original Fender specs.
The diagram would also work the same.
Please excuse my drawing.
Lee
Bottom line is, no one makes quality carbon pot anymore.
The Dunlop is the only thing out there that is usable.
I have had one in my pedal now for about 5 years, no problems.
Here is a diagram for both the Vol and Tone, keep in mind this is not the Fender VT specs, its adapted from the Bigsby spec, and will give you a Speedy West, Doo Wah.
Tom, mentioned to me that he may be able to get these pots in 250K.
If that happens, you could then have the original Fender specs.
The diagram would also work the same.
Please excuse my drawing.
Lee
- Paul Arntson
- Posts: 1372
- Joined: 8 Jun 2004 12:01 am
- Location: Washington, USA
-
- Posts: 416
- Joined: 4 Dec 2008 11:45 am
- Location: Nashville, TN.
Pots
The advice is right on target, Tom can fix you up. I ordered one, put it in my Emmons, and what a difference. Needed a little modification, but nothing that you can't overcome. Tom shipped it the very next day to.
-
- Posts: 29
- Joined: 24 Feb 2009 8:10 pm
- Location: Buffalo, NY
Nope - the reissues still have that same submarine hatch. It doesn't make any sense for working on it, but I'm sure it makes it harder to build, too.
You know, there's something to be said for keeping a reissue authentic, but then again, I don't really understand why it's necessary to keep a terrible design going.
I felt that way about the bridge on my MIJ Fender Jaguar reissue, which kept the poor design of the original in to the reissue.
It's like we're taught to value "authenticity" over usability. It doesn't make a whole lot of sense, does it?
You know, there's something to be said for keeping a reissue authentic, but then again, I don't really understand why it's necessary to keep a terrible design going.
I felt that way about the bridge on my MIJ Fender Jaguar reissue, which kept the poor design of the original in to the reissue.
It's like we're taught to value "authenticity" over usability. It doesn't make a whole lot of sense, does it?
Well at least there's that.It doesn't make any sense for working on it, but I'm sure it makes it harder to build, too.
I couldn't agree with you more. It is totally different from if you were restoring a vintage piece and paying attention to authenticity. And even then I get bored with people who treat the old item as an inviolate religious object. But when in Fender, do as the Fenders.
Or maybe I'll throw this out and buy a new one.
- David Mason
- Posts: 6072
- Joined: 6 Oct 2001 12:01 am
- Location: Cambridge, MD, USA
You know, there's something to be said for keeping a reissue authentic, but then again, I don't really understand why it's necessary to keep a terrible design going.
I felt that way about the bridge on my MIJ Fender Jaguar reissue, which kept the poor design of the original in to the reissue.
Fender is nuts. One of my favorite guitars of recent years is a 24" scale "Mustang" I built out of Warmoth wood with:
non-crap tuners
non-crap pickups
non-crap bridge
non-crap frets
non-crap wiring
I would've bought a Fender, if they'd make a good one - instead, they reissue the old one with everything wrong with it, except in Chinese... You know, there's a "fix" for that Jaguar bridge, replacing some of the saddles with Mustang parts - it's explained on the Warmoth site. What really kills me is the Gibson "authentic historic" reissues with KLUSON TUNERS - remember when the first thing you did was dump that garbage and put on Grovers or Schallers? $6000 for a guitar with Kluson tuners...
-
- Posts: 29
- Joined: 24 Feb 2009 8:10 pm
- Location: Buffalo, NY
This is an interesting conversation - I started a new discussion of this topic specifically: http://bb.steelguitarforum.com/viewtopi ... 42#1374642
- Tim Whitlock
- Posts: 1768
- Joined: 3 Jan 2001 1:01 am
- Location: Colorado, USA
When you guys work on your Fender pedals are you doing it all through the bottom hatch?
Replacing the pots requires that you disassemble the pedal. This is done by simply removing the two bolts on either side. After you reassemble the pedal, the access plate on the bottom allows you to re-attach the string. Like many products from the golden age of Fender you can service or repair them forever with a trip to your local hardware or electronics store.
Great, Tim. Thanks for that. I was starting to mess around, trying to undo the knot where the string is anchored to the base when FORTUNATELY I saw Lee's post in my thread here:
http://bb.steelguitarforum.com/viewtopic.php?t=156887
and now I realize that it all makes more sense than I was giving them credit for. I did not undo the string (whew!) and now I've got the step-by-steps I need to do this right.
So Doug--did you actually replace the pot just through the hatch? Man, that's like building a ship in a bottle. Congratulations.
http://bb.steelguitarforum.com/viewtopic.php?t=156887
and now I realize that it all makes more sense than I was giving them credit for. I did not undo the string (whew!) and now I've got the step-by-steps I need to do this right.
So Doug--did you actually replace the pot just through the hatch? Man, that's like building a ship in a bottle. Congratulations.
- Dave Mudgett
- Moderator
- Posts: 9648
- Joined: 16 Jul 2004 12:01 am
- Location: Central Pennsylvania and Gallatin, Tennessee
I don't think anybody makes a pot volume pedal with a decent pot right now. As Lee says, the problem is that nobody makes a decent carbon-track pot anymore. But lots of players (steel and guitar) prefer pot-pedals. It's just a matter of time before my Goodrich and Sho-Bud pedals all need new pots, and I'll just get some Dunlops. What's the big deal?
I don't understand the beef with the market for reproductions of original designs, but I put my comments about that on the other thread.
Ah, slight correction - Japanese. And I would argue strongly that the quality of the MIJ or CIJ reissues is every bit the quality of American-made guitars, like that idea or not.Fender is nuts. One of my favorite guitars of recent years is a 24" scale "Mustang" I built out of Warmoth wood with: ... I would've bought a Fender, if they'd make a good one - instead, they reissue the old one with everything wrong with it, except in Chinese...
I don't understand the beef with the market for reproductions of original designs, but I put my comments about that on the other thread.
- Nils Fliegner
- Posts: 82
- Joined: 31 Mar 2009 9:01 am
- Location: Germany
- Tim Whitlock
- Posts: 1768
- Joined: 3 Jan 2001 1:01 am
- Location: Colorado, USA
Speedy did his doo-wah's with the tone control on the guitar, at least in the film clips I have seen. I don't know that he ever used a vol/tone pedal - I'm sure Lee would know as he's spoken to the man himself. The vol/tone pedal is a nice alternative that does the same thing but keeps your hands free.
Hey Jon - I have found that it's easier to untie the string from the spring, or cut it, rather than try to re-thread the taught string through the pully system at the back of the pedal. I think it's easier to get the loose string through the pullies and then re-tie it to the spring. FWIW
Hey Jon - I have found that it's easier to untie the string from the spring, or cut it, rather than try to re-thread the taught string through the pully system at the back of the pedal. I think it's easier to get the loose string through the pullies and then re-tie it to the spring. FWIW
-
- Posts: 512
- Joined: 27 Aug 2002 12:01 am
- Location: Vallejo California
- Contact:
- Frank Bradley
- Posts: 62
- Joined: 27 Feb 2009 2:53 pm
- Location: Seaford, Delaware