MSA classic low output pickups
Moderator: Shoshanah Marohn
- Robert Bergland
- Posts: 20
- Joined: 7 Apr 2009 10:06 am
- Location: Austin, TX
MSA classic low output pickups
Hi all, I have an MSA double 12 classic from the 80s. It has a battery on the bottom, and what would have to be active pickups. They sound quite good when the amp is cranked, but the output is super low compared to the passive pickup on my Shobud maverick. I changed the battery and tried every setting, one knob seems to make it sound kind of distorted. Any thoughts?
- Mike Perlowin
- Posts: 15171
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA
- Contact:
The battery is not for active pickups, but for a built in fuzz tone. MSA did not make active pickups.
Apparently the stock pickups have deteriorated.
Fortunately you have lots of replacement options. George L, Lawrence, Truetone, Tone Aligner the new lace Alumitones that Carter is selling, etc. The problem is how do you decide which one?
Apparently the stock pickups have deteriorated.
Fortunately you have lots of replacement options. George L, Lawrence, Truetone, Tone Aligner the new lace Alumitones that Carter is selling, etc. The problem is how do you decide which one?
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
- Larry Jamieson
- Posts: 2414
- Joined: 30 Jan 2001 1:01 am
- Location: Walton, NY USA
- Contact:
I had an MSA at one time with the on board fuzz unit. Mine also had a switch and a tone control. The switch allowed you to select use of the tone control, or the pickups straight through. Does your guitar have these features? Could something be miswired, or the tone control all the way to the mellow side?
I put a Bill Lawrence XR-16 on the MSA and the sound and tone were wonderful...
I put a Bill Lawrence XR-16 on the MSA and the sound and tone were wonderful...
- Robert Bergland
- Posts: 20
- Joined: 7 Apr 2009 10:06 am
- Location: Austin, TX
I will need to really look closely under there. There is so much machinery packed in below it that it is hard to see the little circuit board. I will try the direct leads off of the pickups, that's a good starting point. If the fuzz unit is faulty, should I fix it?, or is that a feature that is not particularly desirable? thanks-BC
- Mike Perlowin
- Posts: 15171
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA
- Contact:
Do YOU desire it? It doesn't matter what others think or say.Bobby Chestnut wrote: is (the fuzz time) a feature that is not particularly desirable? thanks-BC
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
- Dave O'Brien
- Posts: 1583
- Joined: 23 Feb 2002 1:01 am
- Location: Florida and New Jersey
- Contact:
Fuzz
Bobby - IMHO the MSA onboard fuzz is as good as it gets; right up there with a Boss Tone. You usually can't plug a Boss Tone into an MSA due the position of the jack. Do some research on how to use it i.e violin effects, but please don't destroy it! Dave