Nylon hex nuts

Frank Allen · Post by **Frank Allen** » 18 Mar 2009 12:21 pm

Howdy! New to the group and PSG's and was wondering where I can get those little nylon hex nuts that go on the end of the rods for tuning. Several of mine are cracked or marginal on my 1971 Marlen. That's not all that's cracked or marginal, but it's a start.

Thanks!

Andy Hinton · Post by **Andy Hinton** » 18 Mar 2009 4:38 pm

George-L has both sizes. Don't have their address or phone no. handy but you can find them in links at top of the opening page of this Forum. Andy H. I just looked; it's at the top of this page too.

Hook Moore · Post by **Hook Moore** » 18 Mar 2009 5:16 pm

www.georgelsstore.com/steelacc.html

Mike Spaeth · Post by **Mike Spaeth** » 21 Mar 2009 9:12 am

e-mail sent to you

David Biggers · Post by **David Biggers** » 23 Mar 2009 6:26 am

The George L nuts must be either pre-threaded to go on or if you are real strong maybe you can get them started by pushing really hard. I could not.
I would recommend taping the holes 1st then install them.

Mike Mantey · Post by **Mike Mantey** » 24 Mar 2009 8:53 am

I have some available at the link below. They come threaded to a 5-40 thread and are 1/2 long.

http://www.mullenguitars.com/Parts.htm

Part # P0113

The Steel Guitar Forum

Nylon hex nuts

Nylon hex nuts

nylon nuts

re