Pickers who are Ham Radio Operators ?

About Steel Guitarists and their Music

Moderator: Shoshanah Marohn

User avatar
Ric Epperle
Posts: 1634
Joined: 20 Mar 2000 1:01 am
Location: Sheridan, Wyoming USA . Like no other place on Earth... R.I.P.

Post by Ric Epperle »

My Ham Shack... Drake TR-4 for the low bands.. What a good rig... CW is my calling. My antennas are as follows; An inverted V for 75 and 40 meters with a tuner; a zep for good measure and a 20 meter beam 3 element.... On VHF I have a Yeasu FT-470 dual bander that allows me to access our local repeaters.

Both on the 440 side and on 2 meters.

This last year I have built a nice J-Pole for two meters.... I also have a Kenwood TS 7850 that I run in my van. I'm very active as ham. I have made a sub audible tone board that I have interfaced with my Kenwood so next time I get out in North Idaho or the Spokane area, I should be able to key up all of the repeater sites....73's

KE7MK

And if you are in to cross-band repeaters, I can help...


I am amazed how many steel players are involved with Ham Radio... Go figure. 8)
MSA D12 Vintage XL 8+5
Peavy Session 400
User avatar
Gregg Thacker
Posts: 346
Joined: 13 Sep 2004 12:01 am
Location: Pasadena, Texas, USA
Contact:

Post by Gregg Thacker »

Well...I hold a Technician's License. Operated Vioce on HF and on 2 MTRS. Some on 440 MHZ. Haven't been on the air for several years. I am suprised that Mike Sigler has not responded. He is an Amateur Radio Operator. I think he told me at one time that he is an Advanced or Extra.

Gregg
If it don't have a Steel, it ain't real!
Keith Currie
Posts: 368
Joined: 8 Jan 2001 1:01 am
Location: Shellbrook, Saskatchewan, Canada

Post by Keith Currie »

I never get enought time for either, but guess iam a better ham then steller.
Keith
VE5HKC
Sam Marshall
Posts: 370
Joined: 4 Aug 1998 11:00 pm
Location: Chandler, AZ USA

Post by Sam Marshall »

My call is N7INV. I have been licenced since the mid-80's, but really got into the hobby in the last few years. I recently upgraded to General (it was a "paperwork upgrade" since my tech licence was so old).

Last fall, I bought an ICOM 718 and have really been enjoying the HF bands. I have been a SWL nut since the mid 70's. In fact, the SWL bug helped push me into the electrical engineering profession. At one time, I helped in developing state of the art radio receivers and radio ICs for Motorola.

Best Regards,
Sam
Dave Potter
Posts: 1564
Joined: 15 Apr 2003 12:01 am
Location: Texas

Post by Dave Potter »

AC5LS here, but not on the air lately - and it's worth noting I got my Extra ticket when the 20wpm code requirement was still in effect. And I'm damned proud of it.

However, why keep a couple of thousand dollars of equipment operative, when the same result can be had for essentially nothing via the internet? It's a science-fair project at best.

There doesn't seem to be much point in RF comms anymore in amateur radio, unless you're interested in moon-bounce, that kind of stuff. I'm not.
User avatar
Rick Anderson
Posts: 130
Joined: 18 Aug 2005 12:01 am
Location: Niskayuna, NY USA
Contact:

W2WVF

Post by Rick Anderson »

My Dad's was W2WVF -William Victor Fox
My Dad was in Radio corp WWII
The stories he tells can raise the hair on your head, in some locations that is.
Rick Anderson
Walter Jones
Posts: 464
Joined: 17 Aug 1998 12:01 am
Location: Athens, Ohio USA

Post by Walter Jones »

WT8E, been a ham for 29 years. During some of the conversations with pickers I would ofter ask about ham radio, the old reply was , "I have problems with tones, can't hear the code" My reply, "how do you tune your guitar" then I got the sheepish grin meaning I just didn't take time to learn Morse code.
User avatar
Danny Hammers
Posts: 1023
Joined: 23 Feb 2006 1:01 am
Location: Danny & Patricia of Floral City, Florida formerly of Fairdale KY.
Contact:

W4MOP

Post by Danny Hammers »

W4MOP

Still on the air @ 18.130 most of time.

www.w4mop.com
www.w4mop.com/Radios.htm

Awarded ARRL's A-1 Operator Club of which the nomination was very humbling to me,
with only 5089 in the world.

73 Danny
Gibson Console Grand D8 - Weenick DT-10 - Dynalap S8 - TriboTone Bars
Nashville 112s - Vegas 400
Member:
Life Member of R.O.P.E. (Reunion Of Professional Entertainers) , NTSGA, GaSGA, PSGA, ASGA, MSGC, LMSGC, OzarkSGA
User avatar
Danny Hammers
Posts: 1023
Joined: 23 Feb 2006 1:01 am
Location: Danny & Patricia of Floral City, Florida formerly of Fairdale KY.
Contact:

The List

Post by Danny Hammers »

BJ, I'll update the list as more come in.



Danny
Last edited by Danny Hammers on 25 May 2008 8:46 pm, edited 8 times in total.
Gibson Console Grand D8 - Weenick DT-10 - Dynalap S8 - TriboTone Bars
Nashville 112s - Vegas 400
Member:
Life Member of R.O.P.E. (Reunion Of Professional Entertainers) , NTSGA, GaSGA, PSGA, ASGA, MSGC, LMSGC, OzarkSGA
Ben Carnevale
Posts: 1
Joined: 23 May 2008 2:24 pm
Location: Massachusetts, USA

Post by Ben Carnevale »

Hi BJ
Good topic.
I am W1VZT, Cape Cod, Massachusetts
Ham since 1950.
User avatar
Jan Mulder
Posts: 146
Joined: 12 Sep 2004 12:01 am
Location: The Netherlands

Post by Jan Mulder »

My callsign is PA3HCR ( The Netherlands), not very radio active the last years, but I have worked all bands.

Jan
Bill Perry
Posts: 15
Joined: 18 Mar 1999 1:01 am
Location: Hurst,Texas.USA

Post by Bill Perry »

My call is K5CLD. Iam on 75 and 40 meters each day...... Bill Perry
User avatar
Dave Beaty
Posts: 439
Joined: 23 May 2004 12:01 am
Location: Mesa, Arizona, USA
Contact:

Pickers who are Ham Radio Operators ?

Post by Dave Beaty »

Hi Mark,
I've been K7MNC for most of the last 50 years, primarily CW.
BCNU 73
Dave Beaty
Mesa, Arizona
(RCC WAS from Grand Canyon, AZ)
User avatar
Danny Hammers
Posts: 1023
Joined: 23 Feb 2006 1:01 am
Location: Danny & Patricia of Floral City, Florida formerly of Fairdale KY.
Contact:

Post by Danny Hammers »

Ok Guys
Here is the updated list.
And thanks BJ for coming up with this.

Alan Tanner - W8FAX
Ben Carnevale - W1VZT
Benton Allen - WB5TWC
Bill Perry - K5CLD
BJ Jenkins - NC4BJ
Blake Hawkins - N4YCQ
Charles L Powell - N5LMS
Charles Rodrigues - K1QGN
Curtis Boatright - N5RMY
Dalton Boehm - AD9GB
Dan Burnham - AE4AY
Danny Hammers - W4MOP
Dave Beaty - K7MNC
Dave Potter - AC5LS
David Hartley - G6CWP
Delbert Phelps - KB8VJV
Dick Wood - WD5CBO
Duane Becker - KB7GCF
Fred Thompson - K1VYE
Greg Cutshaw - AA2FX
Gregg Thacker - N5LYS
Howard Parker - WA3BMM
James Sluder - KG4WYD
Jan Mulder - PA3HCR
Jim Paschall - K9JCP
Jimmy Lewis - AB5YS
Joe Finley - KA5IFX
John Lemay - AC3G
Keith Currie - VE5HKC
Ken Adkins - K9DVA
Lem Smith - K5WSM
Mark MacKenzie - KC4KFC
Mike Fereday - G3VOW
Mike Hoover - WB5AOC
Reginald Diller - W3VTF
Ric Epperle - KE7MK
Rob Segal - WA2NFG
Robert Harper - W4IWJ
Ron Silva - WB6YMK
Roy McKinney - KD7OOO
Russ Little - N5UG
Sam Marshall - N7INV
Steve Morley - W1LV
Walter Jones - WT8E


Danny
Gibson Console Grand D8 - Weenick DT-10 - Dynalap S8 - TriboTone Bars
Nashville 112s - Vegas 400
Member:
Life Member of R.O.P.E. (Reunion Of Professional Entertainers) , NTSGA, GaSGA, PSGA, ASGA, MSGC, LMSGC, OzarkSGA
User avatar
Ernest Cawby
Posts: 3716
Joined: 6 Aug 2003 12:01 am
Location: Lake City, Florida, USA, R.I.P.
Contact:

good topic

Post by Ernest Cawby »

I worked with WAG4 I Gota Zoo,wag4igz, Built several Heathkits, testers. Also a RC Radio kit, worked very well.
CB radio was so popular we had several of the, SINGLE SIDE BAND, WITH HOME MADE QUAD ANTENA, made out of fishing poles, out talked many comercial made antenas. Good period of time in our lives, one of the things Nan shared with me.
I still have the sending key I practiced on back then out in the shop.

ernie
Last edited by Ernest Cawby on 28 May 2008 2:29 am, edited 1 time in total.
User avatar
Ray Montee
Posts: 9506
Joined: 7 Jul 1999 12:01 am
Location: Portland, Oregon (deceased)
Contact:

I wonder......................

Post by Ray Montee »

I majored three years in tech radio at Benson Polytechnic High School; class of 1954.

Back then, one had to be able to send and/or read like 20 or 60 words per minute in Morse Code. I can no longer recall this fine point. I even made my own
'sender thingie' or 'clicker' like in the olden days of telegraph.

I can fluently identify N -.; A .-; and V ...-

That should count for something, shouldn't it?

Does it?
Chris Collins
Posts: 35
Joined: 5 Oct 2003 12:01 am
Location: Oban, Argyll, Scotland, United Kingdom

Post by Chris Collins »

MM0AHC active when I can mostly on HF cw & phone. Allways looking for contacts stateside so listen out!

73's

Chris
User avatar
Jim Seay
Posts: 44
Joined: 12 Apr 2006 12:01 am
Location: Lenoir City,TN

Post by Jim Seay »

KC4YDF Advanced 73's
='07 Carter/D-10=
User avatar
Joe McHam
Posts: 824
Joined: 6 Sep 1999 12:01 am
Location: Houston, TX * R.I.P.

Ham/Steeler

Post by Joe McHam »

Licensed in 1960 Ex: WN5ARU, WA5ARU, WA7BJE, WA5OKT, K5MAC Advanced: WA5OKT/M Now!!
High Speed CW - Radar - Radio Tech US Navy
VP-22 1960-1962
Houston, TX
Excel Superb S-12 8&5
Fender Princeton Amp.
Peavey Vegas Amp.
Casio PG-380 midi guitar
Ham Radio WA5OKT
Private Pilot SEL
Jamie Danter
Posts: 112
Joined: 3 Mar 2005 1:01 am

Post by Jamie Danter »

Amateur on Radio and Steel. hihi

Have a few vintage Ten-Tec radios: Omni D, Triton IV, Scout, and Century 21.

Spring windstorm dropped my wire ant. Need to get back on the air.

Like CW with a Vibroplex: "Bug", Vibro keyer, and Iambic.

IMO, The best "book" on CW is "The Art & Skill of Radio Telegraphy"-William G. Pierpont N0HFF.

My call is a Vanity.

73 NE4TT, ex KF4VOP

Jamie, Kannapolis NC
User avatar
Mike Sigler
Posts: 1479
Joined: 4 Feb 1999 1:01 am
Location: Give Em A Try !
Contact:

Post by Mike Sigler »

Guys I have been a ham since 1994, (KB8PWI) my novice call, but i hold a general ticket, I love to work Cw at about 22wpm, And Work alot of 80 meter phone at 3.952and so on... I have to many rigs to mention, and i have about 5 SB220 amps and a couple SB200.... A couple long wires and a tribander.... And some 2 meter gear...so on and so on....
If your in central ohio on 2 meter give me a call on 147.030 (Open Repeater) I monitor it all the time.
Mike
Jonathan Cullifer
Posts: 1132
Joined: 30 Sep 1998 12:01 am
Location: Gallatin, TN

Post by Jonathan Cullifer »

Licensed in 2002 as KG4TVT. Now I have Chet Atkins' last callsign, W4CGP, and am an Extra class ham. Semi-active, but only on VHF at the moment.
Don Brown, Sr.
Posts: 1419
Joined: 11 May 2004 12:01 am
Location: New Jersey

Post by Don Brown, Sr. »

73's KD2WO

Don
User avatar
Danny Hammers
Posts: 1023
Joined: 23 Feb 2006 1:01 am
Location: Danny & Patricia of Floral City, Florida formerly of Fairdale KY.
Contact:

53 Hams

Post by Danny Hammers »

Hey BJ, they are coming out of the wood work
53 so far

Alan Tanner - W8FAX - Dayton, Ohio
Ben Carnevale - W1VZT - Massachusetts
Benton Allen - WB5TWC - Muscle Shoals, Alabama
Bill Perry - K5CLD - Hurst, TX
BJ Jenkins - NC4BJ - Dunn, North Carolina
Blake Hawkins - N4YCQ - Land O'Lakes, Florida
Charles L Powell - N5LMS - Kingsport, Tennessee
Charles Rodrigues - K1QGN - Tiverton, Rhode Island
Chris Collins - MM0AHC - Oban, Argyll, Scotland
Curtis Boatright - N5RMY - Frisco, TX
Dalton Boehm - AD9GB - Illinois
Dan Burnham - AE4AY - Tullahoma, TN
Danny Hammers - W4MOP - Floral City, Florida
Dave Beaty - K7MNC - Mesa, Arizona
Dave Potter - AC5LS - San Antonio, TX
David Hartley - G6CWP - United Kingdom
Delbert Phelps - KB8VJV - Brookpark, Ohio
Dick Wood - WD5CBO - Springtown, Texas
Don Brown, Sr. - KD2WO - New Jersey
Duane Becker - KB7GCF - Elk,WA
Fred Thompson - K1VYE - Waldoboro, Maine / Bushnell, FL
Greg Cutshaw - AA2FX - Corry, PA
Gregg Thacker - N5LYS - Farmers Branch, Texas
Howard Parker - WA3BMM - Clarksburg, MD
James Sluder - KG4WYD - Tennessee
Jamie Danter - NE4TT - Kannapolis, North Carolina
Jan Mulder - PA3HCR - The Netherlands
Jim Mitchell - WB3JLA - Phily, Pennsylvania
Jim Paschall - K9JCP - Tennessee
Jim Seay - KC4YDF - Lenoir City, TN
Jimmy Lewis - AB5YS - Harrisonburg, Louisiana
Joe Finley - KA5IFX - Ozark, Arkansas
Joe McHam - WA5OKT - Houston, TX
John Lemay - AC3G - Tucson, AZ
Jonathan Cullifer - W4CGP - Nashville, TN
Keith Currie - VE5HKC - Shellbrook, Saskatchewan, Canada
Ken Adkins - K9DVA - Galena, Mo
Lem Smith - K5WSM - Fulton, MS
Mark MacKenzie - KC4KFC - Franklin, Tennessee
Mike Fereday - G3VOW - Newbury, Berkshire, England
Mike Hoover - WB5AOC - Bryant, Arkansas
Mike Sigler - KB8PWI - Rushville, OH
Reginald Diller - W3VTF - Pennsylvania
Ric Epperle - KE7MK - Sheridan, Wyoming
Rob Segal - WA2NFG - NYC
Robert Harper - W4IWJ - Alabama
Roger Kelly - KE4IAW - Mount Carmel, TN
Ron Silva - WB6YMK - Fresno, California
Roy McKinney - KD7OOO - Imnaha, OR
Russ Little - N5UG - Hosston, Louisiana
Sam Marshall - N7INV - Chandler, AZ
Steve Morley - W1LV - Connecticut
Walter Jones - WT8E - Athens, Ohio

Last update: Jim Mitchell - WB3JLA
Last edited by Danny Hammers on 3 Jun 2008 7:08 am, edited 2 times in total.
Gibson Console Grand D8 - Weenick DT-10 - Dynalap S8 - TriboTone Bars
Nashville 112s - Vegas 400
Member:
Life Member of R.O.P.E. (Reunion Of Professional Entertainers) , NTSGA, GaSGA, PSGA, ASGA, MSGC, LMSGC, OzarkSGA
User avatar
Jim Mitchell
Posts: 617
Joined: 15 Nov 2007 1:24 pm
Location: Phily,Pennsylvania, USA

HAM MAN

Post by Jim Mitchell »

Hi I am WB3JLA Advanced

Jim Mitchell
Aston, Pa Post office 19014
But I live in Boothwyn Pa Upper Chichester

I guess we all know this site
http://www.qrz.com/

My Ham Knowledge helped me build my first amp
A 35 Watt Supro 6420 Thunderbold

My site

http://www.geocities.com/insp/SUPRO6420.html

I may have to put some HAM RADIO STUFF in my site
I am trying to play a Harlin Brothers 1956 Multi Kord 6 String 4 Pedal Steel Guitar
and a RONDO lap
Retired from Boeing Helicopters in Ridley Park Pa.
we build the CH47
Post Reply