think that i'm figuring it out

About Steel Guitarists and their Music

Moderator: Shoshanah Marohn

Post Reply
User avatar
Calvin Walley
Posts: 2557
Joined: 11 Sep 2003 12:01 am
Location: colorado city colorado, USA

think that i'm figuring it out

Post by Calvin Walley »

well folks it took long enough but i think that i am figuring out that learning to pay the pedal steel is a lot like building a house when you have neve drove a nail or cut a board . you make a lot of mistake's just trying to get started . but after a while you get a couple of boards right . then you just have to keep building one board at a time it will take a while but in time you will get the house built . ...i guess what i am saying is i am trying to get 1-2 note's right and built the song from there ...one note at a time ..... folks have i got it about right ????

thanks to all of you great folks. i can't say it enough

calvin
User avatar
Walter Stettner
Posts: 5744
Joined: 21 Nov 2003 1:01 am
Location: Vienna, Austria
Contact:

Post by Walter Stettner »

Yes, you're right!

Take one little step at a time, get as much information as possible from other players, sometimes that crazy lick is just in front of you and you don't see it. Everything you learn will be stored in your personal library for future use.

And the best thing is: You'll never grow tired of learning and there is something new to learn every day!

Keep on Playing!
Walter

------------------
User avatar
David L. Donald
Posts: 13696
Joined: 17 Feb 2003 1:01 am
Location: Koh Samui Island, Thailand
Contact:

Post by David L. Donald »

good approach.
get something to work then add a bit to it.
Really, that's not so far off from how any symphony movement is contructed.
Gene Jones
Posts: 6870
Joined: 27 Nov 2000 1:01 am
Location: Oklahoma City, OK USA, (deceased)
Contact:

Post by Gene Jones »

....."measure twice, cut once" Image
User avatar
Larry Bell
Posts: 5550
Joined: 4 Aug 1998 11:00 pm
Location: Englewood, Florida
Contact:

Post by Larry Bell »

Gene,
Problem I've seen with some students is they measure themselves silly and then never have time to cut. Image

Time with bar in hand and fingers on the strings is VERY important for a beginner. Next most important is to have a teacher who can tell you whether you're spending that time wisely. No substitute for a good teacher.

------------------
<small>Larry Bell - email: larry@larrybell.org - gigs - Home Page
2003 Fessenden S/D-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps
Bob Carlson
Posts: 1063
Joined: 20 Jun 2000 12:01 am
Location: Surprise AZ.

Post by Bob Carlson »

Some people say you can't learn to play steel by using tab, but it has sure helped me. Learn to play one song and every time you set down to your steel play it at least ten times. After you've did that for a month you'll notice your playing improve.

There is a lot more to it then that, but until you can find a teacher it will help.

Bob
User avatar
Robert Jones
Posts: 439
Joined: 23 Oct 2000 12:01 am
Location: Branson, Missouri

Post by Robert Jones »

You can NEVER practice too much. One step at a time is a good formula. The lick that you think is sooooo hard to figure out? It is soo simple that it's hard. My own personal experience. I try too hard. Some times you need to just let it flow. I never turn down any advise from another steel player. I have also never met a steel player that won't be more than happy to show a lick to you that he or she has done. All you need to do is ask. Silence is never a key issue to learning. More so when it comes to learning the steel. I learn something on mine every time I play on mine. Best of luck to you Calvin.

------------------
Mullen Royal Percision D-10 Red Laquar Pearl inlay 8&8
www.dbcooperonline.com

Todd Monroe
Posts: 41
Joined: 26 Jan 2016 9:59 am
Location: Queen City of the Ozark Mountains

Post by Todd Monroe »

Stay with it. Keep practicing. A mentor of mine once told me that 90% of success is showing up. Play the same song over and over and over again, and eventually you'll be able to play it blindfolded (or in Buddy's case, in the dark). Also, the forum is a great reference tool. Don't be afraid to reach out to members for advice, instruction, or critiques. Stay with it and keep pickin'.
User avatar
Paul Stauskas
Posts: 400
Joined: 13 Feb 2015 11:56 am
Location: DFW, TX
Contact:

Post by Paul Stauskas »

Pretty soon you'll be ready for C6, Calvin!
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

calvin's post was from 13 years ago.
i'm sure he's got it down by now!
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

Paul Stauskas wrote:Pretty soon you'll be ready for C6, Calvin!
As many others have stated, it's important not to rush things...
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Les Cargill
Posts: 774
Joined: 1 Jan 2014 7:09 pm
Location: Oklahoma City, Ok, USA

Post by Les Cargill »

At some point, you have to get the thing out of the garage and play with other people.
User avatar
Don R Brown
Posts: 2789
Joined: 27 Dec 2011 9:20 am
Location: Rochester, New York, USA

Post by Don R Brown »

chris ivey wrote:calvin's post was from 13 years ago.
i'm sure he's got it down by now!
:lol:
Post Reply