| Author |
Topic: Film Scanners: pixels, dpi's... |
J D Sauser
From:
Wellington, Florida
|
Posted 9 Apr 2004 2:06 pm |
|
I am contemplating buying a film scanner to scan the banaboxes full of negatives. Since I went digital, I don't really want to mess much with paper again.
So, when comparing these scanners I am a bit unsure about resolution:
Some will feature, let's say 2,570 X 3,855 pixels.
Others will just state like 2720 dpi.
I would like to learn how I can compare those two ways of describing a machine's resolution and how I can translate it all into MegaPixels (like the ones of a digital camera).
Thanks! ... J-D.
[This message was edited by J D Sauser on 09 April 2004 at 03:41 PM.] |
|
|
|
Cal Sharp
From:
the farm in Kornfield Kounty, TN
|
Posted 9 Apr 2004 3:13 pm
|
|
I've never used a film scanner, but I do a lot of flatbed scanning. When I scan film or slides I scan at at least 300%, and at 300 dpi. Save as a .tiff if you think you might print it someday, (print out a couple and see how they look before you scan a whole lot of them) or as a .jpg if it's for the web or computer viewing.
Cal
|
|
|
|
Karlis Abolins
From:
(near) Seattle, WA, USA
|
Posted 9 Apr 2004 5:15 pm
|
|
2400 x 3000 would give you the ability to print a 8 x 10 print at 200 dpi resolution. That is 3.2 megapixels, about what you would get with a 3.5 megapixel camera.
The math is easy. Multiply the horizonal resolution by the vertical resolution to get the megapixels (million pixels) which can then be compared to a digital camera. You can divide the resolution by your printers dpi to determine how large a print you can make that will look photgraphic. If you intend to print 8 x 10 prints, you will have to settle for less resolution than if you print a 4 x 6.
Karlis[This message was edited by Karlis Abolins on 09 April 2004 at 06:21 PM.] |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
Posted 9 Apr 2004 5:44 pm
|
|
Think of dpi as "pixels per inch" instead of dots. If your scan area is 1" x 1", the 2720 dpi scannner will give you an image that's 2720x2720 pixels.
Megapixels is a marketing term used to sell cameras. Multiple width x height and divide by 1 million.
------------------
 Bobby Lee
-b0b- quasar@b0b.com
System Administrator |
|
|
|
J D Sauser
From:
Wellington, Florida
|
Posted 10 Apr 2004 1:56 am
|
|
Thanks to all  !
... J-D. |
|
|
|
C Dixon
From:
Duluth, GA USA
|
Posted 10 Apr 2004 6:10 am
|
|
b0b is correct.
carl |
|
|
|
