Reverb Plug Mod

Dennis Voges · From: San Antonio, Texas

Hello Everyone

I have a Nashville 400 & would like to elimanate the molex plugs. I have heard that there is a way, using RCA plugs. Could anyone tell me how to modify the amp by adding the RCA plugs. Are they mouted to the board or chassis? Thanks again guys for any help you can give me.

Dennis Voges

Jack Stoner · From: Kansas City, MO

I did one by "hardwiring" (soldering) wires to the chassis Molex pins and putting female RCA jacks on them. The wires from the reverb were fitted with male RCA jacks.

That makes a better connection and still allows you to disconnect if the chassis has to be removed from the amp. You do have to enlarge the opening around the Molex pins slightly so the RCA jacks can go through.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: