Page 1 of 1
? MIKE BROWN ON NASHVILLE 400 SCHEMATIC
Posted: 29 Jul 2006 12:19 pm
by BUDDY BARROWCLIFF
Hi Mike
I am working on a nashville 400 for a steel picker in my area and while I found manuals listed on line I don't see any service manuals. Can I download a schematic for this unit. And do you use paypal.
Thank for any help you can offer.
Buddy B
Posted: 29 Jul 2006 12:38 pm
by Mark Schurdevin
I called Peavey and they emailed me schematic for Nashville 400. They are very helpfull
Posted: 29 Jul 2006 1:51 pm
by Bob Lawrence
Posted: 31 Jul 2006 9:47 am
by BUDDY BARROWCLIFF
Hi Bob
Thank you very much for the pointer.
Seems like this forum has more sources for information re our common interests, IE pedal steel and gear than any other place on the planet.
I am in PA and you canada pointed me to CA.
Downloaded the print and printed it out thanks to you.
Now if I can juat unravel the amp problem, all will be well in the world.
Its an intermittent type problem and runs for hours before it shows itself.
Wish me luck.
Buddy B. (notE)
Posted: 1 Aug 2006 4:43 am
by Jerry Erickson
Try putting a cable into the insert jacks when this happens. Those jacks get oxidized over the years.
Posted: 1 Aug 2006 9:45 am
by Mike Brown
Thanks for assisting this fellow steel guitarist, guys!
Posted: 7 Aug 2006 10:46 am
by Bob Lawrence
BUDDY,
No problem. If you can provide additional info I can probably assist you further. The only intermittent problem I have ever had with mine is the reverb and repairing the Mylar connector solved that one. It's been a great workhorse for many years.
=========================================
In regards to finding additional info, yes there are plenty of resources for Steel Guitar. I hope to finish my web site over this winter and officially get it on line. For now I can only only offer a link at a time because everything else is experimental and could change or disappear without notice. print and download while you can
Good luck!
Bob