The Steel Guitar Forum Store 

Post new topic Tapes to cds - what's available ?
Reply to topic
Author Topic:  Tapes to cds - what's available ?
Bill Myrick

 

From:
Pea Ridge, Ar. (deceased)
Post  Posted 4 Jun 2006 6:58 am    
Reply with quote

I have numerous sermons of approximately 45 minutes each on cassette tapes that I would like to copy to cds that will play in our car cd player. I would appreciate helpful info - can I put more than one on a rewritable cd blank ? Is it possible to do high speed, like high speed tape dubbing ? What machines are available ? etc. Thanks -- Bill Myrick.

[This message was edited by Bill Myrick on 04 June 2006 at 07:59 AM.]

View user's profile Send private message Visit poster's website

James Sission

 

From:
Sugar Land,Texas USA
Post  Posted 4 Jun 2006 7:32 am    
Reply with quote

I put my cassettes into the computer with a free software called Audacity. Then I downloaded a free MP3 ripper and and ripped them to MP3 and then burned them to CD. There is probably a faster way, but this way was free....James
View user's profile Send private message Send e-mail

Jim Sliff


From:
Lawndale California, USA
Post  Posted 4 Jun 2006 7:46 am    
Reply with quote

I'm pretty sure WInows XP...or maybe it's the "Plus" package...has a sound transfer program. I'm not at the Windows machine right now, but I've moved dozens of LP's and tapes to CD that way.

For tape you just rn an output from a cassette player to the soundcard input; for LP's you need an RIAA preamp to boost the signal from yor turntable's cartridge output - Radio Shack sells a cheap, small one (3"x3") for 20 bucks or so that works perfectly.
View user's profile Send private message Send e-mail

John Lockney

 

From:
New Market, Maryland, USA
Post  Posted 4 Jun 2006 10:24 am    
Reply with quote

They also make a cassette-player that installs in your computer for this type of thing:
http://www.plusdeck.co.uk/aspbite/categories/index.asp?tim=19:28:21

The "mic" input on your sound-card might be OK for spoken-word but, you could find that you need a better sound-card to transfer music with acceptable quality. It might depend on whether you want to make MP3 or full CD-quality.


[This message was edited by John Lockney on 04 June 2006 at 11:28 AM.]

View user's profile Send private message Send e-mail

Al Marcus


From:
Cedar Springs,MI USA (deceased)
Post  Posted 4 Jun 2006 10:26 am    
Reply with quote

I run a tape to a line in on the computer. Works good. But I am looking for a dual Cassette recorder/ player with a mic input, to do some songs...al

------------------
My Website..... www.cmedic.net/~almarcus/


View user's profile Send private message Visit poster's website

richard burton


From:
Britain
Post  Posted 4 Jun 2006 9:18 pm    
Reply with quote

Al,
Why not tape direct to the computer, using the Audacity recorder?

Further to what Jim says about recording off vinyl, I've had some success using my old Portastudio 4 track cassette recorder to boost the signal.

(No I don't use it to put the music onto tape!!)

I just plug the left and right outputs from the record player to the inputs on the Portastudio, and the outputs from the Portastudio to the computer input.

It also allows me to boost the signal, shape the tone slightly, and maintain the stereo tracks.
View user's profile Send private message Send e-mail

Dean Dobbins

 

From:
Rome, Ilinois, U.S.A. * R.I.P.
Post  Posted 5 Jun 2006 4:23 am    
Reply with quote

I have a Pioneer CD digital recorder, and dual casset deck with the recording deck having a pitch adjustment, pacthed through the auxillary inputs my stereo system.I can make CDs from anything in the system,(turntable, VCR audio, tuner, etc.). The only drawback is, sometimes there is not enough time between songs on the casset to allow the auto tracking mode to separate some tracks on the CD.

------------------
Dino
View user's profile Send private message

Bill Myrick

 

From:
Pea Ridge, Ar. (deceased)
Post  Posted 5 Jun 2006 5:53 am    
Reply with quote

Thanks for all the good info--but my computer is oriented in my office and not really as handy as it should be for using it for the above. Is there not some kind of "stand alone" machine available that will dub audio cassettes to cds ?? Thanks again.
View user's profile Send private message Visit poster's website

Dennis Wallis

 

From:
Arkansas
Post  Posted 5 Jun 2006 2:04 pm    
Reply with quote

Here's what I have......an RCA CDRW120 CD recorder. I have my dual cassette deck (which is also a recorder) hooked to it. This way I can put tapes onto CD or CD onto tape. You have to use MUSIC CD's but that's no big deal. After you make a CD you can RIP the files off onto your computer and make copies if you want to. It works great. Also if there's not enough time bewteen tracks on the tape it has a manual mode so you can make the individual tracks. I doubt if they make this model anymore but you can still find them. Worth the money. You can put almost ANY signal onto CD with this machine. EVEN LIVE !!
View user's profile Send private message Send e-mail

Bill Myrick

 

From:
Pea Ridge, Ar. (deceased)
Post  Posted 6 Jun 2006 2:34 am    
Reply with quote

Thanks Dennis---I'll check into that . I also have heard there is some kind of a little portable unit that will plug into the car somehow so the CD player can play a cassette tape, but I may have it backwards.
View user's profile Send private message Visit poster's website

John Daugherty


From:
Rolla, Missouri, USA
Post  Posted 6 Jun 2006 5:43 am    
Reply with quote

Bill, You could probably find a used computer for less than $100 that would run the recording program you need to transfer tapes. You can buy new CD burners for the computer for $30.

------------------
www.home.earthlink.net/~johnd37


View user's profile Send private message Visit poster's website Yahoo Messenger

Ray Minich

 

From:
Bradford, Pa. Frozen Tundra
Post  Posted 6 Jun 2006 12:04 pm    
Reply with quote

I have a Phillips CDR-870 standalone unit. Combination CD player recorder. It "DEMANDS" you use "music" cd's. Works OK off the mixer output, but, tape hiss will keep it from advancing to the next track number.
View user's profile Send private message Send e-mail

Bill Myrick

 

From:
Pea Ridge, Ar. (deceased)
Post  Posted 7 Jun 2006 1:15 am    
Reply with quote

Well if I understand correctly, a cd will barely hold a 45 minute audio sermon anyway, right ? I'm dumb about this stuff for sure !! And of coarse, our car cd player needs to play it also.
View user's profile Send private message Visit poster's website

Pee Wee Rogers

 

From:
Lebanon, Tennessee, USA * R.I.P.
Post  Posted 7 Jun 2006 4:12 am    
Reply with quote

I use a Sony RCD-W500C CD recorder.

The way I connect it to the Stereo is through the earphone jack. . . so what ever is on the speakers goes on the CD.

It requires that you use Music-R CD's and each one holds 80 minutes.

Almost enough for two sermons or one sermon with comments.

I have recorded from the Radio, Turntable,
CD player and Tape player and the quality is great as you would expect from Sony.

I also have a VCR hooked up to my Stereo
because we do the Opry Tuesday, Friday and Saturday.I record the whole thing on VCR EP and then play it back in real time to CD.

The quality seems to me better in real time.

Hope this helps. . .Pee Wee Rogers
View user's profile Send private message Send e-mail

Bill Myrick

 

From:
Pea Ridge, Ar. (deceased)
Post  Posted 9 Jun 2006 8:32 am    
Reply with quote

Thanks to all for your info and help. Pee Wee I ordered the same unit you have today. I think it fits my situation the best and thanks so much !!! Bill.
View user's profile Send private message Visit poster's website

Ken Fox


From:
Nashville GA USA
Post  Posted 10 Jun 2006 6:14 am    
Reply with quote

http://www.pcworld.com/howto/article/0,aid,117810,00.asp

Good article about ripping vinyl to CD. Also explains the RIAA preamp needed for a turntable. Most of the article would apply to tapes as well
View user's profile Send private message

Bill Myrick

 

From:
Pea Ridge, Ar. (deceased)
Post  Posted 12 Jun 2006 3:03 am    
Reply with quote

Hey Ken--Good to hear from you !! Thanks for the upgrade on my profex II at Dallas and for locating my dobro programing next to my Hughey one that I use almost exclusively. It's sure a lot handier now !!
View user's profile Send private message Visit poster's website

Jim Sliff


From:
Lawndale California, USA
Post  Posted 13 Jun 2006 4:21 am    
Reply with quote

There were a few combination cassette/CDR machines made in the 90's. I borrowed one from a buddy to tranfer a few things, but his is long gone and we can't recall the maker...but for some reason I keep thinking it was under the Teac name.
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP