| Author |
Topic: Dpc 750 ? |
Stewart Thompson
From:
Puyallup, WA.
|
Posted 28 Apr 2006 6:52 am |
|
This may be an answer that's obvious to most here on the forum, but here goes: How do you tell the difference between bridged and stereo mode? Because there's really no way to tell by the button on the back panel.
Stew |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 28 Apr 2006 8:43 am
|
|
Stewart,
I checked my DPC 750 manual and this is what it says:
Bridge Mode Selector
This button is provided to choose between stereo operation and bridged mode (mono) operation. To select the bridge mode, the button should be in the "in" position.[This message was edited by Erv Niehaus on 28 April 2006 at 09:44 AM.] |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 30 Apr 2006 6:48 am
|
|
| I'm not sure what your question means.........do you mean that you can't tell what position the countersunk bridge/stereo button is in? Or do you mean audibly? |
|
|
|
Stewart Thompson
From:
Puyallup, WA.
|
Posted 30 Apr 2006 1:34 pm
|
|
Both. Audible difference and can you tell by looking at the button on the back panel if it's bridged or stereo? Thanks!
Stew |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 30 Apr 2006 2:48 pm
|
|
| If you are in "bridged" mode only the A channel input and output is used. If you have speakers attached to both A and B outputs only the A output should have signal, according to the manual. With the "Bananna Plug", the "A" Channel connection is the "hot" lead. |
|
|
|
Stewart Thompson
From:
Puyallup, WA.
|
Posted 30 Apr 2006 3:51 pm
|
|
Thanks for the info...I bought the amp used, so I didn't get a manual with it. I wonder if Peavey has it on their website?
Stew
|
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 1 May 2006 1:52 am
|
|
| Yes, the manual is downloadable (pdf file) from www.peavey.com |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 1 May 2006 5:10 am
|
|
| Thanks for the help Jack. |
|
|
|
