| Author |
Topic: Evans amp problem |
Gary Glisson
From:
munford, tn 38058
|
Posted 21 Apr 2006 3:55 am |
|
--------------------------------------------------------------------------------
hi anyone that owns evans FET500 lv! i'am having a problem with hum. and i'am thinking its the wireing in my house but i'am running my master gain on (1) and my volume on (5),
with no hum but my volume is down .
when i turn my master gain up past (1) i get a hum and this is happing in both amps the hum stays the same as far as loudness go's whether its 1 1/2 or 10 on the master gain. when i turn the master gain up and volume control up i have plenty of power and its very loud.but with the pedal off it hums, i've tried the adapter three to two prong no effect,i've bypassed the volume pedal, no effect i'am plug into jack # 2 , which is the normal jack beacause i use the hilton super sustane.even taking the hilton sustane out ,hum still there when master gain is above 1 1/2
anyone had this problem from your evans any thoughts on what might cause this. i have a brand new goodrick 10k pedal,
any help would be appreciated
thanks gary
|
|
|
|
Allen Howington
From:
North Carolina, USA
|
Posted 21 Apr 2006 4:48 am
|
|
| One thing to try is plugging it in at your neighbors house, this will eliminate your house wiring. |
|
|
|
Andy Schick
From:
Kingston, Ontario, Canada
|
Posted 21 Apr 2006 6:54 am
|
|
Try a seach for Brad Sarno. I believe he stated by replacing certain caps that will clean up humm in the older FET.
Andy |
|
|
|
Randy Gilliam
From:
San Antonio, Texas, USA
|
Posted 22 Apr 2006 12:35 am
|
|
| Gary on my Evans he Humm turned out too Be the speaker. It Had a Floating Magnet Chip. Good Luck. Randy |
|
|
|
Gary Glisson
From:
munford, tn 38058
|
Posted 24 Apr 2006 4:20 am
|
|
close this one bob i got it figured out no more hum
thanks gary |
|
|
|
