The Steel Guitar Forum

Hello everyone,

I am getting my first PSG, and I need a volume pedal. My PSG is costing me more than I planned on spending, so I need to find an affordable volume pedal to start on.

Any ideas?

Thanks,

Jason

Hi Jason, It's good to hear that you found a guitar. Your life will never be the same. Hopefully in a good way...haha .
Volume pedals are frequently for sale on the forum. I suggest you buy one built for steel guitar use, such as Goodrich, Shobud,etc. I highly recommend the Hilton pedal, but you said you wanted to start cheap.
A lot of steel players have suggested you stay away from the Ernie Ball pedal because of the foot angle. Most of the used Earnie Ball pedals you will see for sale have the jacks on the front. You can't use these on steel guitar.
A good used pedal will be priced around $70-$100. Good hunting ......JD

.<font size="1" color="#8e236b"><p align="center">[This message was edited by Garth Highsmith on 09 January 2006 at 08:55 PM.]</p></FONT>

or:


http://www.steelguitar.com/accessor/accedesc.htm#VolPed

Buy Now
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by John Fabian on 09 March 2005 at 12:02 PM.]</p></FONT>

Jason, my wife & I have just ordered a Hilton VP for our son in Texas, however, they are on back order right now. As soon as he gets it, we'll be glad to donate his "no name" pedal to you if you still need one then. I'm hoping that will be within a month.
Bill

------------------
The toter of my wife's Zum SD10 3/5, Nashville 1000 amp, Hilton VP, Sarnos SGBB & Kay Double Bass

Jason, I just read your post. I have a pedal around here some where I am not using. I will look for it today and when I find it you can have it. I will send you and email for your address when I locate it. I hope it is still around here some where. Bennie

Jason, I found the volume pedal. I sent you an email..it is a Goodrich steelman dual photocell pedal...this comes with a limited warranty of course! Bennie

Jason, you get that Goodrich SM pedal from Bennie and you won't be needing anything else, it's for sure a keeper!

I mailed the volume pedal to Jason this morning.. Bennie

Way to Go Bennie!

Bennie,what a great thing to do. God Bless.

cant say to much about all volume pedals but have a que. can some one out there give me a wireing diagrum for emmons volume pedal
Thanks Charlie

Charlie,

Virtually all passive (potentiometer) pedals are wired the same:

Instrument line to one outside pot terminal (the one next to the internal sliding contact when the pedal is at full on), Amp line to the center terminal and the other outside terminal wired directly to ground - so that when the pedal is at full off the amp input is grounded. Often this ground terminal is simply bent back and soldered to the case of the pot itself (assuming that there is contiuous metal contact between the jack and the pot mounting).

When wired thusly the pickup sees the same load (more or less, anyway) at all volume settings.

------------------
<font size="2"><img align=right src="http://www.pdxaudio.com/dgsept03.jpg" width="114 height="114">Dave Grafe - email: dg@pdxaudio.com
Production
Pickin', etc.

1978 ShoBud Pro I E9, Randall Steel Man 500, 1960 Les Paul (SG) Deluxe, 1963 Precision Bass, 1954 Gibson LGO, 1897 Washburn Hawaiian Steel Conversion</font>
<font size="1" color="#8e236b"><p align="center">[This message was edited by Dave Grafe on 15 March 2005 at 01:50 PM.]</p></FONT>

Thanks Dave
AS long AS I had this pedal I didn't no how It was wired I just had to change pots it didn't work right so I guess Its wired wrong.
Thanks again Charlie