Page 1 of 1
Bigsby or Not?
Posted: 26 Feb 2005 8:07 am
by Ron !
Just spotted this one on fleabay....is this a bigsby or not?
Maybe the seller does not know what he has for sale.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=2384&item=7302832506&rd=1
Ron
------------------
Nikaro SD10 4x6 ,Nikaro SD10 4x5,2 Peavey Ultratube 112
European Steel Guitar Forum
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Ronald ! on 26 February 2005 at 08:08 AM.]</p></FONT>
Posted: 26 Feb 2005 8:19 am
by Bud Harger
It appears to be a Bigsby Volume / Tone pedal. Why it plugs in to the wall is a mystery to me. The In / Out guitar plugs are on the right side...barely visible, but they're there. This is a very restorable pedal.
bUd
Posted: 26 Feb 2005 8:39 am
by Chris Lucker
Is that na Edwards Light Beam with side-to-side tone?
Posted: 28 Feb 2005 1:33 pm
by Steve Merritt
I beleive that Duane Marrs did a prototype pedal similar to that when he worked at Sho-Bud. I e-mailed the seller and he says when you plug it in there is a small red light on the side that lights up. I have no idea why...neither did he.
Posted: 28 Feb 2005 1:41 pm
by Ron !
I asked the guy that is selling this pedal and he said it's not a bigsby.
Ron
------------------
Nikaro SD10 4x6 ,Nikaro SD10 4x5,2 Peavey Ultratube 112
European Steel Guitar Forum
Posted: 28 Feb 2005 11:11 pm
by Russ Wever
Bigsby Pedals had the brand name cast into the front of the upper half.
Also the bottom length of the upper half wasn't straight, but had a curve to it.
~Russ
Posted: 1 Mar 2005 4:48 am
by Bob Carlucci
I have a feeling its a 70's Fender Volume/Wha...thats what it looks like to me... bob
Posted: 1 Mar 2005 7:22 am
by Erv Niehaus
I don't think it is a Fender. The Fender pedal wasn't aluminum like this one. It was chrome and shiny.
Erv
Posted: 1 Mar 2005 2:38 pm
by Donny Hinson
Russ is right, with no "Biqsby" logo, it's probably not a Bigsby. Looks like an early Edwards light-beam pedal, to me. That would also explain why it needs the 110v plug.<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Donny Hinson on 01 March 2005 at 02:38 PM.]</p></FONT>
Posted: 2 Mar 2005 7:58 pm
by db
YES, EDWARDS!
I WANT IT!
------------------
Dan Balde
U-12/8&5, S-7/D 3&1, S-6/E,A & G3
Posted: 2 Mar 2005 8:05 pm
by db
Edwards used a copy of the original Bigsby castings to make all of their pedals . . .
I don't understand why there was never a lawsuit here!
If you inspect their assemblies you can actually see the Bigsby casting "signatures"!
------------------
Dan Balde
U-12/8&5, S-7/D 3&1, S-6/E,A & G3
Posted: 2 Mar 2005 8:11 pm
by db
This assembly converts easily to an LED - low voltage set-up with minimal expense.
------------------
Dan Balde
U-12/8&5, S-7/D 3&1, S-6/E,A & G3