| Author |
Topic: ProFlex II . Tube Fex PSG Presets Needed |
William Johnson
From:
Statesboro, Georgia, USA
|
Posted 7 Feb 2005 6:54 pm |
|
who has some PSG presets for the Peavey ProFlex II and/or the TubeFex? i prefer the TUbeFex PSG Presets if available.
when i go my first TubeFex years baCK, I TRANLSATED THE pROfLEX II (had a old ProFlex earlier) presets OVER TO the TubeFex MANUALLY AND IT SOUNDED GReAT.
i have since sold the TubeFex and got a new TubeFex so i need to re-program the PSG presets.
BTW: i drive my Nashville 400 via the 'AMP IN' on the rear from the TubeFex 'Un-Balanaced Left Output', by-passing the 400 front-end.
do most go in front the front of the 400?
who patches their volume pedal In/Out at the front f]panel Insert/Return jacks?
i did not use the front Insert/Return as I use a Goodrich 120 volume pedal driving the teh GTubeFex front input jack.
what do most do? i understand hte impdeancce issues when loading a STG PU with a passive 500K pot which is in most volume pedal, etc.
where can i get a single PSG screw in chrome leg as Emmons and ShoBUds uses? or actually i only need teh two threaded halfes as the threads are stripped out some.
thnaks,
billy
|
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 8 Feb 2005 6:23 am
|
|
Billy, I live over in Ray City, GA! I can reload it from my midi-filer. I have Newman and a combo of Newman and Peterson settings. I took out a lot of the duplicate Newman settings and added some of Jeff Peterson's in place.
I can also upgrade to a chip that needs no battery backup for $35.00 and return freight. Includes settings reloaded, old battery removed ans cleaning of any battery residue left behind by the old battery.
If someone you know had a card for a Profex 2 with settings, it will load into the unit as well. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 8 Feb 2005 7:11 am
|
|
Ken, thanks for your help as always. I can also load the presets at no charge if you will send your blank RAM cartridge to the factory. Our address is;
Peavey Service Center
Attn; Mike Brown
412 Hwy. 80 East
Meridian, MS 39301
I'll be glad to assist you.
Mike Brown
Peavey Electronics Corporation |
|
|
|
