Page 1 of 1
Which type of volume pedal is suitable for 3 wir
Posted: 17 Sep 2003 2:12 am
by Buck Nosaka
Very sorry for I did not explain clearly.
When I hook up my PS to the amplifire using 3 cable hook up system by Peavey.
My question is which type of Volume pedal is suitable , 500K type or 10K type ?
Posted: 17 Sep 2003 3:05 am
by Roger Crawford
Buck...everyone that I know that uses the three wire hook up uses the standard 500 ohm pot that comes in all pot pedals.
Posted: 17 Sep 2003 5:48 am
by Mike Brown
Yes, that is the most common.
Posted: 17 Sep 2003 7:20 am
by Larry Bell
And, Buck, if you are using the 10K pots in the Goodrich H10K or L10K pedals, you should be aware that the 3-cable hookup may not be of any benefit, since those pedals have a buffer amp built into them which solves the same problem -- loss of highs when you use the pedal to lower the volume.
Just a thought worth mentioning.
------------------
<small>
Larry Bell - email:
larry@larrybell.org -
gigs -
Home Page
2003 Fessenden S/D-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps