| Author |
Topic: Peavey Speaker/Amp Question (maybe Mike Brown??) |
Terry Downs
From:
Wylie, TX US
|
Posted 28 Jan 2003 9:40 pm |
|
I have been playing a lot of bass gigs lately. I have been using the Peavey TMAX rack mount 500W amplifer which I really like.
I was given the cabinet from a Peavey bass amp combo TNT 115. The amp and speaker are gone so I was going to install a 15" speaker in the cabinet and use it with the TMAX. I can't find a 15" speaker that will fit. Both JBL and Peavey Black Widow 15" speakers require a 14" cutout. The cutout on this cabinet is 13-13/16". Was a Scorpion used in that model possibly having a smaller cutout? Does anybody know what speaker was supplied in the TNT 115?
Regards,
Terry |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 29 Jan 2003 7:08 am
|
|
My guess is that it came equipped with a Peavey Sheffield speaker, but could have possibly been a Scorpion. What's the serial number of the amp and I can tell you what it was.
Mike Brown
Peavey Electronics Corporation |
|
|
|
Terry Downs
From:
Wylie, TX US
|
Posted 29 Jan 2003 7:50 pm
|
|
Mike,
Thanks for the response. The SERIAL# is 7A-019508. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 30 Jan 2003 1:06 pm
|
|
| Terry, that serial number is way before computers were even around and would not be on file. The number indicates that it is a 1977 model. If my guess is correct, it probably came with an Eminence speaker at that time. |
|
|
|
Terry Downs
From:
Wylie, TX US
|
Posted 1 Feb 2003 7:23 pm
|
|
I checked out the specs for all Eminence 15" speakers and their cutout is 14". I can't find any data in Sheffield speakers. I'm not sure where I can find a 15" speaker with a frame like I need.
Thanks Mike for you help. I appreciate you being on the forum.
Terry |
|
|
|
