The Steel Guitar Forum Store 

Post new topic Speaker Enclosures...again
Reply to topic
Author Topic:  Speaker Enclosures...again
Ron Randall

 

From:
Dallas, Texas, USA
Post  Posted 24 Nov 2002 11:02 am    
Reply with quote

This Forum is great.
I have read the archives and learned a lot about the pros and cons of open and closed cabinets, ports and all.

I wonder. The makers of very high end studio monitors, that have the power to work in a live stage application, are closed, ported, have a woofer and tweeter, a bi-amp, and a crossover around 2.6Khz. Some are like 130Watt woofer and 70watt tweeter. Some even more. Most are intended to be mounted in a wall.

If I can ignore the snooty price for a minute, I wonder what a single or a pair would sound like?
View user's profile Send private message Send e-mail

Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 24 Nov 2002 7:34 pm    
Reply with quote

They would probably give you a lot more highs than you wanted. A tweeter is kinda "overkill" with a pedal steel...they gots gobs o' highs already!

Also, though high-end studio monitors sound real good in a studio, they aren't really suited to schlep around to gigs all the time. Remember...they're made to "hang on a wall", and weren't built to put up with constant banging around in various forms of transportation. Also, though they're very impressive (quality-wise), they're not really designed for the constant high-power peaks one encounters when playing live steel guitar. Bad idea, really.

Besides...they cost too damn much.
View user's profile Send private message Send e-mail

James Quackenbush

 

From:
Pomona, New York, USA
Post  Posted 25 Nov 2002 7:57 am    
Reply with quote

Ron,
I'm not aware of anyone putting a mic on a studio monitor to record with....As Donny said, there are plenty of highs coming out of a 12 inch or 15 inch speaker...You really don't need any more highs than that unless you want to call the dogs to your house from other neighborhoods !!...The reason studio monitors sound good is that they are suppose to give you a faithful recreation of what was recorded...So what goes in, should come out !
If you plug your steel into studio monitors and mic them, and then play them back on studio monitors, you will hear your steel with highs that will make you wish you didn't
I'm putting together a cabinet with 1 - 15, and one with 2 - 12's...I'm not adding any horns or tweeters..The deep bottom end will go to the 15 inch cabinet , and the mids and highs will go to the 2 - 12's cabinet...I'm sure that I will have more than enough highs using this setup....Jim
View user's profile Send private message Send e-mail

Dan Tyack

 

From:
Olympia, WA USA
Post  Posted 25 Nov 2002 8:30 am    
Reply with quote

Ron, try plugging into your stereo and see how you like it. If you like it better than an amp, then you might really like that kind of speaker cabinet.

------------------
www.tyack.com
View user's profile Send private message Send e-mail Visit poster's website

Stephen Gambrell

 

From:
Over there
Post  Posted 25 Nov 2002 10:24 am    
Reply with quote

Ron, if you take Dan's advice, and plug into your stereo, then turn it WAAAAYY down, or you WILL blow up your speakers. I guarantee it!
View user's profile Send private message Send e-mail

Ron Randall

 

From:
Dallas, Texas, USA
Post  Posted 25 Nov 2002 12:49 pm    
Reply with quote

Thanks!!!

I am glad I asked! I understand now why studio monitors are what they are. I will get off that track and go practice. That 15" BW is sounding mighty good.

You are right. I don't need these for steel.

The grass is not as green as I thought.

View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP