peavey LTD 400

jim milewski · Post by **jim milewski** » 13 Sep 2002 12:52 pm

just got an old LTD working, anybody know anything about this amp, would like to get schemetic and parts placement paperwork on it as I want to put an effects loop in it, near the front end of the preamp, I put a jbl d140 8 ohm in it seems like a good amp, anybody use or own one, I put a sine wave through and it is not linear at any EQ setting, right off the first stage, (no EQ there anyway) the negative peak has a scoop at 1KHZ or any frequency, the sound with a steel is a very good tone, I really like this amp, is it a noticeable reduction in volume from 4 to 8 ohm speakers?, I have only played it in my room, so it has not come close to being pushed[This message was edited by jim milewski on 14 September 2002 at 07:36 AM.]

Darvin Willhoite · Post by **Darvin Willhoite** » 13 Sep 2002 2:14 pm

I have one I bought new in 1980. I have never had one problem with it, and it is still in showroom condition. It has a great sound with both steel and guitar. Mine still has the old Spider web Black Widow speaker in it.

------------------
Darvin Willhoite
Riva Ridge Recording
[This message was edited by Darvin Willhoite on 13 September 2002 at 03:15 PM.]

Mike Brown · Post by **Mike Brown** » 16 Sep 2002 10:48 am

Most parts and a schematic is still available and can be ordered through our Parts Department here at the Peavey factory. You may call 1-877-732-8391 to order.

We'll be glad to assist.

Mike Brown
Customer Services

Michael ODriscoll · Post by **Michael ODriscoll** » 19 Sep 2002 8:36 pm

You can try this document on Peavey's web site... http://www.peavey.com/media/pdf/manuals/80344000.pdf

------------------
::: I used to be disgusted, and now I try to be amused. :::