The Steel Guitar Forum

Hello Friends,

I have a vegas 400 and I want to use 2 channels with a different effect box on each channel.

On channel 1 I want to use an ART tube pac (tube compression device) and on channel 2 I want to use my Zoom 505 guitar processor.

Is this possible to do? Any ideas on how I would connect something like this?

any input would be much appreciated


Smitty

------------------
Paul Smith
Chandler RH-2 LapSteel

Yes, there should be no problem with doing this as long as the device doesn't overdrive the input of the amp. The nominal input of the high gain input on channel one is 40mV and maximum 2.5volts. The nominal input on the NORMAL channel is 40mV. Check the output level of your effects devices for compatibility.

If you have further questions, please feel free to contact me here at the factory.

An A/B box would work.