Using Line6 Pod

Rusty Hurse · Post by **Rusty Hurse** » 16 Oct 2000 8:33 am

Has anyone use Line6 Pod in studio or live and what were your impression of this unit. I know guitar players love them.

Rick Schmidt · Post by **Rick Schmidt** » 16 Oct 2000 9:13 am

Rusty.....my experience with the POD is kinda limited, but I've had really good luck with a borrowed Johnson Millenium "J-Station"
(Johnson's version of the POD).....so far I'm knocked out!
The whole trick with either unit, I've been told, is to access the deep editing capabilites with your computer. The edit program for the Johnson is killer!
One day I brought my whole live rig into the house and A-B'd it with the J-Station until I matched both of them.... frequency for frequency....nuance for nuance. Through the board or through my Session 400.
I've already done a session with it, and it was a big improvement over my previous "direct to the board" system. I really feel that virtual speaker/amp combo's are getting closer & closer to being nailed by these cool little boxes!
One of the things about the J-station (vs the POD) that I like better for steel is they have bass amp/speaker models that you can tweek to get the high headroom that we need.

Now I just have to buy one of my own

Martin Abend · Post by **Martin Abend** » 16 Oct 2000 10:07 am

I updated it to Vs 2.0 and finally got a half-way decent steel sounds, but it's still a disappointment. Works great for guitar, though. You should definetly check out the Johnson and the Bass POD by Line 6.

------------------
martin abend my homepage martinabend@yahoo.com
s-10 sierra crown gearless 3 x4 - fender hotrod deluxe

Post by **b0b** » 16 Oct 2000 10:13 am

I'm moving this to the Electronics area.

------------------
<img align=left src="http://b0b.com/Averybob.gif" width=64 height=81>
 -b0b- quasar@b0b.com 
-System Administrator

Mike Perlowin · Post by **Mike Perlowin** » 16 Oct 2000 10:40 am

I have one, and while it's great for getting a lot of different guitar sounds, I've yet to find a setting on it that's appropriate for steel.

Jay Ganz · Post by **Jay Ganz** » 16 Oct 2000 12:31 pm

And now Yamaha has their version...the DG-Stomp. Best thing is to order
them thru one of them mail order places
that gives you 30 day approval. Then
send back the ones you don't like.

Dan Tyack · Post by **Dan Tyack** » 16 Oct 2000 7:59 pm

Mike said

I've yet to find a setting on it that's appropriate for steel.

Wow, I have yet to find a setting that isn't useful in some situations on the steel. Of course, I don't play guitar, so I look to get those sounds on the steel rather than the guitar. My only problem with it is that the default gain structure for the clean amp models are too distorted, and the effects are nothing to write home about. But the amp and speaker sims are pretty effective, I think (especially the high gain ones).

------------------
www.tyacktunes.com

Lowell Gilbertson · Post by **Lowell Gilbertson** » 17 Oct 2000 11:57 am

I recorded my Tele direct with a line 6 pod and got a fabulous sound...it was better than a 64 deluxe that I cut other parts with!

The only thing I found is that I loved the Tweed sound, and maybe the blackface sound and could live without the rest, which is a lot of baggage to pay for.

------------------
Sho-Bud SuperPro
1976 Peavey Session 400
[This message was edited by LowellG on 17 October 2000 at 12:58 PM.]

Bill Leff · Post by **Bill Leff** » 17 Oct 2000 3:51 pm

I've had one for quite a while and like it, though I do find that on clean settings that the noise floor is too high (too much hiss). Interestingly enough, I have found the Mesa Boogie Mark 1 clean sounds (available through "deep editing", now available from the front panel on Pod 2.0) to be some of the best clean tones, so POD users should check that out.

I've found that most POD users are younger players looking for heavier, distorted tones. The POD does those pretty well.

Greg Derksen · Post by **Greg Derksen** » 18 Oct 2000 7:19 am

Its been a while since I tried it, but I
remember the dirty sounds being more real
than the clean sounds. I would like to try one through a good tube power amp and
speakers, but then the whole idea is to bypass that stuff. I think its going to be
a while yet before they really nail the
complexity of a great amp.
Something to keep in mind , would you rather
have 1 incredable tone or 10 average tones,
especially for recording, live is maybe more
forgivable due to all the variables.
The more I think about, the more I would
go for 1 killer tone. Greg