hook up
Moderator: Shoshanah Marohn
- Dennis Rehrig
- Posts: 94
- Joined: 18 Apr 2000 12:01 am
- Location: Pennsylvania, USA
hook up
profex11 to 2 nash 400s
-
- Posts: 240
- Joined: 24 Dec 1999 1:01 am
- Location: Leeds,Al. US
- Contact:
- Jack Stoner
- Posts: 22087
- Joined: 3 Dec 1999 1:01 am
- Location: Kansas City, MO
The preferred hookup is from the Profex II left and right channels out to the Power Amp in on the back of the amps. The Profex II is a preamp/EQ/effects processor and you don't need the preamp and eq in the amps. There are people that run them into the front panel amp in and others that run it in the effects loop.
-
- Posts: 5027
- Joined: 4 Aug 1998 11:00 pm
- Location: Meridian, Mississippi USA
Dennis, did you send me an e-mail message a week or so ago as it had the same wording and I didn't know what you needed. The message was routed from our Parts Department, so you may have not received my reply. I apologize.
There are other ways to try a hookup with these components, but Jack suggested the most common. If you need more than one hookup, my e-mail address is "mikebrown@peavey.com" or you can call me inside the U.S. at our toll free number which is, 1-877-732-8391. I'll be glad to assist you.
------------------
There are other ways to try a hookup with these components, but Jack suggested the most common. If you need more than one hookup, my e-mail address is "mikebrown@peavey.com" or you can call me inside the U.S. at our toll free number which is, 1-877-732-8391. I'll be glad to assist you.
------------------
-
- Posts: 802
- Joined: 28 Dec 1999 1:01 am
- Location: peckerwood point, w. tn.
-
- Posts: 3730
- Joined: 1 May 1999 12:01 am
- Location: 248 Laurel Road Ozark, Missouri 65721
- Contact: