Author |
Topic: Matchbox 7A on the BLINK! |
Steve Feldman
From: Central MA USA
|
Posted 18 Apr 2000 10:02 am
|
|
My Matchbox 7A is making scratchy noises like what you hear when your pot is going on your volume pedal. Although this only happens when I engage the volume pedal, it is NOT the pedal itself.
So, I've got the back off of this thing here, and I see closed input and output jacks, and a couple of 'mod pot clarostats' for the tone and gain knobs, respectively. In between these pots is a small circuit board with a couple of 'firecracker-looking things' and a plug-in 8-pin chip. The two batteries are OK, I believe.
Anyone know how to troubleshoot which pot it is? I can't seem to isolate it by playing. And can you get these from Goodrich (or anywhere else)?
Thank-you much.
Steve |
|
|
|
Jim Smith
From: Midlothian, TX, USA
|
Posted 18 Apr 2000 10:11 am
|
|
It's probably best and easiest to send it back to Goodrich. They fixed my MatchBro last year for $25 and it's worked great ever since!  |
|
|
|
Jack Stoner
From: Kansas City, MO
|
Posted 18 Apr 2000 2:19 pm
|
|
Many times a coupling capacitor will go bad and act just like a scratchy pot.
If it's not batteries then the best thing is to send it back to Goodrich.
|
|
|
|
Lee Baucum
From: McAllen, Texas (Extreme South) The Final Frontier
|
Posted 18 Apr 2000 2:46 pm
|
|
Steve - I had that same problem one time. As it turned out, I did not have the output cord (on the bottom) plugged in all the way. I have no idea why the volume pedal would make the scratching noise, but it did.
Lee, from South Texas |
|
|
|
Bill cole
From: Cheektowaga, New York, USA
|
Posted 18 Apr 2000 7:17 pm
|
|
Lee I had on and the exact same thing I looked at every thing there is 2 positions in the output plug the first one saves the bat. it must be all the way in |
|
|
|
Len Amaral
From: Rehoboth,MA 02769
|
Posted 19 Apr 2000 6:04 am
|
|
Hi Steve:
I have 2 model 7A mathchbox and I am experiencibg the same problem. One unit has developed quite a bit of noise and the other is just starting to get noisy. The units are about a year old and were quiet when I first got them. I am sending my units back for inspection.
Len Amaral |
|
|
|