Steel guitar amplifiers, effects, etc.
Moderator: Shoshanah Marohn
-
Kevin Rickert
- Posts: 90
- Joined: 20 Nov 2006 1:01 am
- Location: Tennessee, USA
Post
by Kevin Rickert »
looking for a tech in Nashville area for an older Evans HV amp. Thanks for any suggestions.
-
Ken Fox
- Posts: 9620
- Joined: 20 Apr 2001 12:01 am
- Location: Nashville GA USA
Post
by Ken Fox »
Jim Evans shared schematics with me for all his amps. I have the info you will need if you find a repair shop
I no longer do amp repair other than walk in repairs
-
Willie Sims
- Posts: 379
- Joined: 28 Jun 2013 1:10 pm
- Location: PADUCAH, KY, USA
Post
by Willie Sims »
what is wrong with the amp ,is it a f.e. t.500 evan;s ..
-
Ken Fox
- Posts: 9620
- Joined: 20 Apr 2001 12:01 am
- Location: Nashville GA USA
Post
by Ken Fox »
It would be the FET 500 HV
I have schematics for it
-
Kevin Rickert
- Posts: 90
- Joined: 20 Nov 2006 1:01 am
- Location: Tennessee, USA
Post
by Kevin Rickert »
Blows fuse when turned on. Thanks Ken If I need the schematic I'll let you know.
-
Ken Fox
- Posts: 9620
- Joined: 20 Apr 2001 12:01 am
- Location: Nashville GA USA
Post
by Ken Fox »
Likely suspects are shorted filter cap(s), shorted output transistor(s) or power supply rectifier diode(s)
