The Steel Guitar Forum

Have a fairly new (2018, I think) Fessy SD10, and have messed up the threads on one of the rods that connect the pedal to the changer shaft. I checked with Fessenden, but he said they have none. Would anybody have one they could sell me ? PM or text me at 585-216-7749. Thanks.

Mark Yeomans
Rochester, NY area

A little clarification please. Do you mean the rod with the connector that runs from the pedal to the pull connector like this one?



If it's the threaded portion down by the pedal, perhaps the threads can just be chased and straightened up?

If it's beyond repair, probably contact Michael Yahl at www.psgparts.com. He can likely custom build one to match the bends and hook at the puller.

Yes, Jerry. That's the one I messed up. Do you know what thread chaser I would use to try to repair the threads ?

I don't know what size the threads are on a Fessenden. I'd have to defer to other Fessy owners. If they are cut threads vs. rolled, many maker's pedal rods are 10-32 threads.

If it's determined that's what you need, we can offer you some sources for acquiring an inexpensive chaser.

repairing the threads is best but if you can't maybe you could shorten and extend the pedal rod

Here's 1" extender but shorter ones are available https://www.steelguitarshopper.com/brands/Show-Pro.html

Thanks Gene and Jerry. I was able to repair the threads as suggested, and am back in business again. You guys are a great resource for all of us less-than-mechanically expert pickers out here. Thanks, again.