| Author |
Topic: In Search of Owner of New MSA |
Gus Callaway
From:
California, USA
|
Posted 11 Dec 2020 10:41 am |
|
I have a new MSA legend D10 on the way, and need a measurement for my tab rack. If you have a similar guitar, could you take this measurement and give me the length? It is the distance from the top of the leg to the top of the guitar:
 |
|
|
|
Mike Perlowin
From:
Los Angeles CA
|
|
|
|
Gus Callaway
From:
California, USA
|
Posted 11 Dec 2020 2:55 pm
|
|
| It fits, but I have a heavy song book that requires extra support. Tom recommended adding a "shelf" that will rest on the top of the guitar, and asked for this measurement. |
|
|
|
Al Evans
From:
Austin, Texas, USA
|
Posted 12 Dec 2020 6:17 am Re: In Search of Owner of New MSA
|
|
| Gus Callaway wrote: |
I have a new MSA legend D10 on the way, and need a measurement for my tab rack. If you have a similar guitar, could you take this measurement and give me the length? It is the distance from the top of the leg to the top of the guitar:
|
"Top of the guitar" is a little tricky, because on mine, the wooden top is about 3/16" up and 3/16" in from the top of the metal end piece. The metal part is right at 3 1/8".
Me, I'd add plenty of padding if I was going to make any of it support a heavy song book. You might consider scanning/printing the specific songs you're interested in?
--Al Evans
_________________
2018 MSA Legend, 2018 ZumSteel Encore, 2015 Mullen G2, G&L S-500, G&L ASAT, G&L LB-100, Godin A4 Fretless, Kinscherff High Noon |
|
|
|
Gus Callaway
From:
California, USA
|
Posted 13 Dec 2020 11:55 am
|
|
Thanks Al, that's what I needed.
I use the real book for jazz gigs, and it's important to be able to pull up a song if someone calls one out. The light weight solution would be an iPad, but for my current budget I went with the hard copy version. |
|
|
|
