| Author |
Topic: EPS15C vs other Neo Identification-Solved |
Richard Lotspeich
From:
North Georgia
|
Posted 5 Jun 2020 2:09 pm |
|
I cant get Eminence to answer my emails,,so I'll check here. Many discussions about the EPS speakers with no sticker. Does any one know for sure,,that they are indeed EPS15C?? The ink stamp on the cone is the same,,so I assumed it was. Quilter uses a type of the same speaker,,and I think without a sticker. Tried to get it from the horses mouth,,but no answer to 2 emails.
_________________
Dick Lotspeich
Last edited by Richard Lotspeich on 10 Jun 2020 11:12 am; edited 2 times in total |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 5 Jun 2020 4:30 pm
|
|
| I dunno. Eminence makes several speakers that look identical, or nearly identical, the EPS-15, the CX8-15, Delta-Lite 15, and the Double-T 15 (there may be more I don't know about). Numbers stamped on the cones or frames are probably a manufacturer ID and date code, and neither likely gives any info about the model. Kinda hard to tell them apart without labels. |
|
|
|
Richard Lotspeich
From:
North Georgia
|
Posted 5 Jun 2020 6:45 pm speaker
|
|
Thats what I was thinking too. Since it doesn't have the sticker,,I don't know how I'll find out for sure. Has to be a why to identify,,even if only by Eminence. Not only that,,if its not a 15C, then I didnt get a true measure of tone by trying it. The differences are subtle I'm sure.
_________________
Dick Lotspeich |
|
|
|
Lee Warren
From:
Nashville, Tennessee, USA
|
Posted 6 Jun 2020 6:48 am
|
|
Hi Richard,
I sent you a PM, regarding speaker ID.
Lee |
|
|
|
Steve Hinson
From:
Hendersonville Tn USA
|
Posted 6 Jun 2020 11:12 am
|
|
How many Eminence 15"neo speakers have an aluminum dust cap?
SH |
|
|
|
Richard Lotspeich
From:
North Georgia
|
Posted 6 Jun 2020 3:04 pm
|
|
The EPS as far as I can tell from the website. The LITES have the same cover but coated Id say. Now the Telonics looks to be a weighted cap. The Quilter version of the EPS is the same,,but for small frequency spec changes as Jack Stoner has said Pat Quilter told him.
_________________
Dick Lotspeich |
|
|
|
Richard Lotspeich
From:
North Georgia
|
Posted 6 Jun 2020 3:13 pm Quilter VS Eminence EPS15
|
|
Well I think I just had a revelation. The posts are different on EPS vs Quilter EPS. Looks like the Quilter version has spades,,the EPS15C has thumb screws,,and a Telonics has spring loaded.
_________________
Dick Lotspeich |
|
|
|
Ian Worley
From:
Sacramento, CA
|
Posted 6 Jun 2020 7:36 pm Re: Quilter VS Eminence EPS15
|
|
| Richard Lotspeich wrote: |
| Well I think I just had a revelation. The posts are different on EPS vs Quilter EPS. Looks like the Quilter version has spades,,the EPS15C has thumb screws,,and a Telonics has spring loaded. |
Spring loaded posts give the best tone
 |
|
|
|
Tommy Detamore
From:
Floresville, Texas
|
Posted 7 Jun 2020 4:55 pm
|
|
I have several Steelaire speakers, as well as an EPS-15. All of my Steelaire speakers have a matte gray finish on the magnet cover. The EPS-15 has a shinier black finish on the magnet cover.
I also have a Telonics 15” that has the shinier black finish like the EPS.
Not sure what this all means, if anything 😜
_________________
Tommy Detamore
Source Audio, Goodrich Sound, and Stringjoy Authorized Dealer
www.cherryridgestudio.com
www.steelguitartracksonline.com |
|
|
|
Richard Lotspeich
From:
North Georgia
|
Posted 7 Jun 2020 6:59 pm
|
|
Tommy can you confirm the speaker terminals on each one of those. Telonics are spring-loaded,, EPS has thumbscrews,, and the quilter has spades?
_________________
Dick Lotspeich |
|
|
|
Tommy Detamore
From:
Floresville, Texas
|
Posted 8 Jun 2020 5:58 am
|
|
My Telonics 15 has spring-loaded terminals...
My EPS-15 has thumbscrew terminals...
Two of my three Steelaire speakers have spades, the other has thumbscrews...
The plot thickens! 
_________________
Tommy Detamore
Source Audio, Goodrich Sound, and Stringjoy Authorized Dealer
www.cherryridgestudio.com
www.steelguitartracksonline.com |
|
|
|
Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 8 Jun 2020 12:58 pm
|
|
Anybody know which model Neo Eminence 15" has a bullet shaped aluminum cone with a mesh screen over the top of the cone? Odd looking.
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8. |
|
|
|
Richard Lotspeich
From:
North Georgia
|
Posted 8 Jun 2020 4:15 pm
|
|
Tommy,,,That,,,is not the confirmation I was hoping for. 
_________________
Dick Lotspeich |
|
|
|
Richard Lotspeich
From:
North Georgia
|
Posted 10 Jun 2020 6:17 am
|
|
Just got an email from Anthony Lucas at Eminence. He has confirmed the ink stamp being an EPS15C. He also said there should be an identification label underneath one of the frame legs somewhere.
_________________
Dick Lotspeich |
|
|
|
