The Steel Guitar Forum

I have attempted everything I know to tune the E-Eb knee lever. The 4th string will not drop to Eb, and the 8th string tunes in. Just bought this Emmons # 456L. A double neck refitted to a single neck, with 4 pedal 4 knee lever. I could use a little help please.

Make sure the split tuning allen screw is backed out enough.

John not sure where that is, or if I have one

It can help tremendously if you turn the guitar over and simply look at what's happening. Is the raise finger on that string moving when you're actuating the lower?

Yes the fingers move, the cross rod moves, and the bellcranks move. Just can't tune the 4th string from the E - Eb for the drop

What John Swain said. The split tuning screws are the counter sunk hex screws above the nylon tuners

ok I'll try that thanks

John Swain wrote:Make sure the split tuning allen screw is backed out enough.

Randy, Here is what John is speaking of.

Jack and John, thank you. 1st time tuning a Emmons. Your help is deeply appreciated. I learn something new every day. This is why I came to The Forum. I can receive the right knowledge from those who know. Again thanks.

Sorry Ron, I saw the picture after I fixed the problem but thanks for providing the visual aid

Again guys thank you. We are now tuned up and playing!!!!