Page 1 of 1
Vintage 7 string Frypan with no Serial Number
Posted: 5 Aug 2019 3:34 pm
by Tom Dillon
Posted: 5 Aug 2019 5:34 pm
by Steve Wilson
Not much help on the dating issue except to check potentiometer codes, but can you tell what the material is inside the headstock?
Posted: 6 Aug 2019 12:15 pm
by Scott Thomas
Hmmm. I don't see a "pat. pend". on the tab for the thumb screw adjuster either.
They started using that kind of knob when a tone was added to the bakelite models along with a patent number.
My guess is that the knob isn't original to the guitar. It "probably" would have had an octagonal volume knob, making it pre-1937 ish.
In any case, I don't think that guitar is any later than mid 1930s. Exactly when doesn't matter for value since it is a rare Pre-War 7-string Frypan.
Posted: 6 Aug 2019 2:16 pm
by Rick Barnhart
Steve Wilson wrote:can you tell what the material is inside the headstock?
Looks to me like part of the aluminum casting, forming the slotted head.
Posted: 6 Aug 2019 6:58 pm
by Tom Dillon
thanks for the clues. It looks like the headstock is 100% aluminum.
Posted: 7 Aug 2019 1:19 am
by Bill Creller
My 7 string has a serial number, but not very legible. Also has the "Pat Pending" stamped in it, which I believe is like 1936(??)
Posted: 7 Aug 2019 3:58 pm
by Jerry Wagner
My 7-string is serial number 048, has a single original octagon knob, & has no "Pat Pending" stamp on it. I'm pretty sure that makes it 1934, maybe '35. Mine looks just like this one, with the polished aluminum top; back & sides finished with a metallic platinum color paint. The knob on this one is a Ric knob from later 1930's; most likely a replacement of the small original octagon knob. Mine has a putty plug in the end of the head-stock.
Jerry Wagner
Posted: 7 Aug 2019 7:28 pm
by Steve Wilson
Jerry,
Would love to have a frypan one day! Is that putty plug in yours soft in composition, or is it a harder material?
Posted: 8 Aug 2019 9:37 am
by Tim Whitlock
Man that's one beautiful old guitar and I bet it sounds like one meellion dollars!
Posted: 8 Aug 2019 10:16 am
by Jerry Wagner
Hi Steve,
The putty plug in the head-stock looks kind of like plastic wood, but it's obviously not. It was probably installed by the guy who took a perfectly good parlor guitar, amputated the neck, cut a big hole in the top and screwed it onto my frypan when it was virtually new. My pan has very few scratches, and absolutely none on the back of the body, because it was buried in the parlor guitar until shortly before I bought it from Gryphon in 2015. I think maybe the original owner did this to mimic Alvino Rey, who had an early frypan mounted inside a parlor guitar. Interestingly, the part of my pan that was inside the parlor guitar is metallic gold while the neck paint is platinum color. I think it's all the same original paint; the question is "why the color difference?" I've seen other frypans with black crinkle, gold or platinum paint; but not both gold & platinum color on one instrument.
Posted: 8 Aug 2019 10:47 am
by Noah Miller
Except for the black crinkle ones, these weren't painted. The gold color comes from clear lacquer that was applied over the aluminum; the lacquer yellows over time, producing a gold tint. The lacquer doesn't adhere very well to bare aluminum, which is why they tend to have a mottled appearance. Different color greys result from the presence or absence of lacquer, and varying states of oxidation of the aluminum.
Where is this plug in the headstock? I'm not seeing it.
Posted: 8 Aug 2019 12:22 pm
by Scott Thomas
I think that's right about the gold color and the aging/oxidation, Noah. Although the selective aging is odd. I also had a frypan that had a cream colored crinkle finish.
Jerry, I recall seeing that guitar for sale when it was built into the acoustic guitar. Very interesting. Good to know that those circumstances helped to preserve the back in a way hardly heard of.
Posted: 8 Aug 2019 12:25 pm
by Tom Dillon
Noah, they are talking about a different guitar. The one pictured above doesn't have a hole/plug in the headstock. I heard it played live last night. It sounds great.
Wow!
Posted: 8 Aug 2019 4:54 pm
by Mark Helm
That's amazing. I've only ever seen a couple 7-string pans. Sweet guitar!
Jerry Wagner
Posted: 8 Aug 2019 9:55 pm
by Steve Wilson
Thanks for the info, Jerry! Nice score on the frypan from Gryphon!
Posted: 9 Aug 2019 6:28 pm
by Bill Creller
If I were to get a different frypan, it would be a long scale 6 string. Short scale doesn't quite get the sound of a long scale......at least to my ears !