Terminology 9th vs 2nd

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
Dylan Ritter
Posts: 30
Joined: 12 Jul 2011 7:33 am
Location: North Carolina, USA

Terminology 9th vs 2nd

Post by Dylan Ritter »

So...why is the 9th so commonly referred to as the 9th and not the second? I've noticed it lately even, in e9 steel terms, when referring to the note at the 7th string (first occurance of 2nd/9th in an octave for a given feet). I suspect there is something more to it than arbitrary convention.

Dylan
does it look like it fits on my lap?
Bill McCloskey
Posts: 6877
Joined: 5 Jan 2005 1:01 am
Location: Nanuet, NY
Contact:

Post by Bill McCloskey »

Chords are built on 3rds. 3rd, 5th, 7th, 9th.
Check out my latest video: My Biggest Fears Learning Steel at 68: https://youtu.be/F601J515oGc
Greg Lambert
Posts: 763
Joined: 10 Oct 2016 3:07 pm
Location: Illinois, USA

Post by Greg Lambert »

I have always thought it was so because the 9th is a tonal value higher than 8th which seems to blend better than the lower tonal value ,ie 2nd.
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

Greg Lambert wrote:I have always thought it was so because the 9th is a tonal value higher than 8th which seems to blend better than the lower tonal value ,ie 2nd.
The way I was taught was, if the (in 'E') F# was a whole step above the root, it was a 2nd, and if it were a whole step above the octave of the root, it is a 9th.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
User avatar
Dave Mudgett
Moderator
Posts: 9648
Joined: 16 Jul 2004 12:01 am
Location: Central Pennsylvania and Gallatin, Tennessee

Post by Dave Mudgett »

When stacking 3rd intervals to make a chord, starting from the root = 1, you get 1, 3, 5, 7, 9, 11, 13, and then you get back to the root 2 octaves up. The 9, 11, and 13 intervals are an octave up from the 2, 4, and 6, respectively.

By convention, when there is a 7th interval in a chord, i.e., chords with 2/9, 4/11, and/or 6/13 notes, the chord is generally labeled 9/11/13, whichever is highest.

So, if there's a major 7th interval in the chord, extensions are called maj9, maj11, maj13. If there's a b7th (generally called simply a 7th or dom 7th) interval in the chord is called 9/11/13 or dom9/dom11/dom13.

This is not the only way to construct/name chords, but stacking 3rds is very common, if not dominant, in western music.
User avatar
Tony Glassman
Posts: 4470
Joined: 18 Jan 2005 1:01 am
Location: The Great Northwest

Post by Tony Glassman »

The convention is that the 1,3 &.5 comprise the triad (maj, min, dim or aug). Additional tones are usually added above rather than below the triad tones.....with some exceptions. ( i.e. sus, 7b5 etc)
User avatar
Jeremy Reeves
Posts: 225
Joined: 4 Jul 2018 9:13 am
Location: Chatham, IL, USA
Contact:

Post by Jeremy Reeves »

It's a 9th if there's a 7th in the chord. If not, it's a 2nd
User avatar
Dave Meis
Posts: 1026
Joined: 8 Jan 2015 7:46 pm
Location: Olympic Peninsula, Washington, USA

Post by Dave Meis »

I was taught that any chord extension higher than '7th' *assumes* that the 7th tone is in the chord.. i.e.: a 9th chord has a 7th tone in it.. if you had a 6th chord with the 9th tone and no 7th, it would be a '6 add 9'. It's only a 9th, 11th or 13th IF it contains a 7th tone.. but I've been wrong before! :)
User avatar
Richard Sinkler
Posts: 17067
Joined: 15 Aug 1998 12:01 am
Location: aka: Rusty Strings -- Missoula, Montana

Post by Richard Sinkler »

Is this post about a 9th chord as opposed to a 2nd/9th scale tone? As scale tones, if you use string 8 (E) as a root, the 7th string F# would be the 2nd scale tone. The 4th string E would be the octave ( 8 ) and the 1st string F# would be the 9th scale tone.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
Chris Reesor
Posts: 427
Joined: 9 Dec 2008 9:39 am
Location: British Columbia, Canada

Post by Chris Reesor »

The 9th is the same note name as the 2nd, but an octave up. In the same way, the 4th becomes the 11th, and the 6th becomes the 13th.

In chord construction, these are all "extensions" of a 7th chord, minor, major. or dominant.

If the seventh is not present, say you play 1-3-5-9, that is an "add 9" chord.

That 6/9 chord you reference is kind of a special case, Dave. The usual guitar voicing starts with a major third, then becomes a stack of perfect fourths.

C6/9 - C,E,A,D,G.C Note that the fifth does appear but here it is technically a twelve. I haven't tried extending it further since I don't have a keyboard handy and my underarm guitar only has six strings.
Excel Superb U12, MIJ Squier tele, modified Deluxe Reverb RI, Cube 80XL, self built acoustics & mandolins
User avatar
Fred Treece
Posts: 3920
Joined: 29 Dec 2015 3:15 pm
Location: California, USA

Re: Terminology 9th vs 2nd

Post by Fred Treece »

Dylan Ritter wrote:So...why is the 9th so commonly referred to as the 9th and not the second? I've noticed it lately even, in e9 steel terms, when referring to the note at the 7th string (first occurance of 2nd/9th in an octave for a given feet). I suspect there is something more to it than arbitrary convention.

Dylan
In terms of steel guitar, it could be that the 7th string of a 10-string E9 pedal steel is referred to as a 9th because it is a carryover from an 8-string E9 tuning common at the dawn of pedal steel that included a low root well as a major 3rd below that F# (E-G#-B-D-F#-G#-B-E, low-to-high), so it was a true 9th chord tone back then.

I think a grip on the low strings of E9 psg (B-D-E-F#) is not a great way to voice a dominant 9th chord, and to my ear it is one of the lesser functions of those strings. But I digress.

To expand a little on Chris’s excellent response - In terms of intervals, the 2nd is a note’s nearest neighbor. A 9th is clear over in the next octave, and cavorts around with 7ths and 13ths to form dominant chord types. The 6ths and the Major 7ths spread vicious rumors about the dominants, and the b5ths are always looking for ways to corrupt them...
User avatar
Tony Prior
Posts: 14522
Joined: 17 Oct 2001 12:01 am
Location: Charlotte NC
Contact:

Post by Tony Prior »

sometimes we exert energy trying to figure out the reasoning behind why something is defined.

The Sky is Blue, the Sun is Yellow... Music theory is defined...

It's a language , one we can all understand and relate to. 2nd or 9th, we can't call them both the same thing. The most simple expatiation above, they are an octave apart so they are NOT the same. A reference was required that we can all understand. Otherwise we would have serious conflicts of music.

Years back when I was a Mass Spectrometer Service Engineer we could spend our time trying to understand why electrons of various sizes moved thru the Quadruple at varied speeds or we could just accept that they do. Some other extremely brilliant scientists figured it out and laid the foundation. All I needed to know is, are the Electrons actually making it thru the Quadruple , and if not, something is broken. I didn't need to figure out why those scientists came up with the theory of it all.



Why does that amplifier work and create sound ?

Because its ON...

I would suggest we play and listen rather than trying to figure out why there is even sound in the first place !

Unless of course we are engineers first and players second :lol:
Emmons L-II , Fender Telecasters, B-Benders
Pro Tools 8 and Pro Tools 12
jobless- but not homeless- now retired 8 years

CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website
Chris Reesor
Posts: 427
Joined: 9 Dec 2008 9:39 am
Location: British Columbia, Canada

Post by Chris Reesor »

Not a good way to voice a ninth for sure, Fred, but that is because the crucial third, G#, is missing while the often omitted fifth is present. Better to play 9,7,6 and let the bass player do his job. Or 8,6,2 lowered a half,1. Gotta have that tritone, man.

But a point to make here is that one often neither wants or needs to play a fully voiced extended seventh chord on ten string E9. Just look at the frequently used "drop back 2 frets and lower the B string" ninth voicing. In C, at fret 8, play 6,5,4. That's E,G,C. Drop back to fret 6, lower string 5 a half and you've got D,E,Bb. That is the ninth, third and flat seven, the guide tones and the color tone. Ninth chord implied, mission accomplished.

There are many more ways that three notes or even two notes can imply complex harmonies in an ensemble, and very often less is indeed more.

Of course, us U12 guys have more voicing choices. :)
Excel Superb U12, MIJ Squier tele, modified Deluxe Reverb RI, Cube 80XL, self built acoustics & mandolins
Pete Burak
Posts: 6530
Joined: 2 Oct 1998 12:01 am
Location: Portland, OR USA

Post by Pete Burak »

There's a reason it's not called "Music Fact"! :lol:
User avatar
Fred Treece
Posts: 3920
Joined: 29 Dec 2015 3:15 pm
Location: California, USA

Post by Fred Treece »

Pete Burak wrote:There's a reason it's not called "Music Fact"! :lol:
LOL, Pete.
Yeah, in theory you could have 100 notes in an octave. In that case, a 2nd and a 9th could not be mistaken for being the same.
User avatar
Tim Herman
Posts: 279
Joined: 13 Jan 2013 9:05 am
Location: Alberta, Canada

Post by Tim Herman »

Read through this thread and find the answer that suits your problem. Then make music with it. Theory is an interesting rabbit hole. If what you find sounds good in the end...Success! (from a theory teacher)
Jeremiah Wade
Posts: 122
Joined: 7 Jan 2010 11:52 am
Location: Bladenboro, NC

Post by Jeremiah Wade »

When talking about intervals the 9th, 11th, and 13th are piano terms. Those were extensions played with the right hand. Outdated terms. When talking chords they are the proper names for extended seventh chords. You may even sometimes see the 10th written in some places. The 10th is the third an octave higher. The fifth is stable and is always called the fifth to my knowledge.
I'd rather be pickin'
User avatar
Fred Treece
Posts: 3920
Joined: 29 Dec 2015 3:15 pm
Location: California, USA

Post by Fred Treece »

9th = 2nd + Octave.
User avatar
Chris Tarrow
Posts: 465
Joined: 27 Mar 2006 1:01 am
Location: Maplewood, NJ

Post by Chris Tarrow »

The 2nd and the 9th may be the same note, but if you see them on a chord chart they mean different things. Have seen every chord under the sun playing big band jazz, composers are very particular about what's happening in the rhythm section as they don't want anything clashing with the horns.

C2 means 1,2,5 (no 3rd)
C9 means 1,3,5,b7,9
C6/9 means 1,3,6,9 (no 5th)
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

Chris Tarrow wrote:Composers are very particular about what's happening in the rhythm section.

C2 means 1,2,5 (no 3rd)
C9 means 1,3,5,b7,9
C6/9 means 1,3,6,9 (no 5th)
Thanks Chris - music theory is only useful if it can be put into practice.

I also agree with Fred that the 9th and 7th strings are indeed the 7th and 9th degrees above a low E (which actually exists on an extended tuning).
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
User avatar
Charles Kurck
Posts: 154
Joined: 15 Mar 2010 1:14 pm
Location: Living in Arkansas but Heaven is home

Chord Layout Chart

Post by Charles Kurck »

Image
Post Reply