Dennis Detweiler
From:
Solon, Iowa, US
|
Posted 26 Dec 2018 4:05 pm |
|
I'm curious. Tell me if the mounting bolt(s) on the front (far left) end of your key head is bolted through the body and frame on your guitar or bolted through the wood body of the guitar. My Zum key head is mounted with two bolts through the body and one at the end of key head which goes through the body and frame flange. I've always had trouble with temperature sensitivity in tuning the guitar compared to my MSA. This might be the culprit? If so, I can relocate the mounting screw at the end. Or, I can drill a larger hole in the flange and allow the bolt head to pass through the flange and tighten down on the body.
_________________
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Revelation preamp, Carbon Copy Delay and Hall Of Fame Reverb, Crown XLS 1002, 2- 15" Eminence Wheelhouse speakers, ShoBud Pedal, Effects Pedals. 1949 Epiphone D-8. |
|
