The Steel Guitar Forum

Posted: **13 Sep 2005 10:27 am**

Peter Den Hartogh asked me to post this message:

Does anybody know how to contact Duane Marrs?
I have used this email address: marrsofmadison@aol.com
but I have not received any reply for weeks and multiple emails.
(I do not want to phone him from South Africa)
Thanks,
Peter den Hartogh

Edited by Nic du Toit:
It looks like they have been found

Read the end of the Topic.
[This message was edited by Nic du Toit on 02 November 2005 at 09:36 PM.]

Posted: **13 Sep 2005 11:11 am**

Here's his Web Site. http://www.duanemarrs.com/

Posted: **13 Sep 2005 11:22 am**

Thanks Roy,
Peter is aware of this link.
He just would like to see replies to his emails to Duane or Jeff.

Posted: **13 Sep 2005 1:42 pm**

To my understanding they are moving the shop. I don't know exactly where but in the
same area of Nashville, Hendersonville.

Posted: **13 Sep 2005 1:44 pm**

Yes both Duane and Jeff are in the process of moving the shop to another location. Duane's phone number is 615-868-5344. You can still catch him sometimes.[This message was edited by Kevin Hatton on 13 September 2005 at 05:46 PM.]

Posted: **13 Sep 2005 1:56 pm**

615-868-5344

Just talked to him the other day. He's moving the shop to Mt. Juliet,Tn.

Posted: **30 Oct 2005 6:21 pm**

I was just assured i was getting my order so i am very happy.
THanks Jeff
This message was edited by Sonny Miller on 31 October 2005 at 04:45 PM.][This message was edited by Sonny Miller on 12 November 2005 at 06:19 PM.][This message was edited by Sonny Miller on 12 November 2005 at 06:22 PM.][This message was edited by Sonny Miller on 24 November 2005 at 09:17 AM.][This message was edited by Sonny Miller on 24 November 2005 at 12:23 PM.]

Posted: **2 Nov 2005 6:00 am**

GUILTY. Peter your parts were sent in Sepetember after we spoke. Not sure time frame for shipments to South Africa.
Yes, we have NOT been efficient in the past and are striving to get organized with our move. My wife Gloria and I have spent literally days sorting and labeling Sho-Bud parts. We have a gracious supply now.
Duane and I knew we would have set backs with the move since we both bought in Mt.Juliet and homes that were in need of remodeling etc.. in addition to moving the shop and contents which we are still doing. I have just a few more road dates this year and shouldn't be away for a while.
Our business has exploded thanks to this forum and hope to better serve in the near future. As many know, Duane has almost never turned anyone down on any type of repair to save a guitar and keep the cost down. This is just an explanation and not an excuse for our hold up. Thanks again for being patient.
I can be reached at 615-453-2371 and the address is 1824 Logue Road
Mt.Juliet, TN 37122

Sincerely, Jeff Surratt

Posted: **2 Nov 2005 9:31 pm**

Hi Jeff and Duane,

I sent you an email on 22 October to tell you that I received the parts in good condition, thank you so much.

Here is a copy of that email:

<BLOCKQUOTE>quote:<HR>
22 October 2005

Hi Duane and Jeff,

Congratulations with your new venture. That sounds fantastic! I wish you guys good luck and I know it will work great!.

I would like to thank you for the parts I ordered. They arrived in perfect condition.
I managed to get the vertical lever in and it works perfectly. It was a tight fit however!
And thank you for the extra bits and pieces. They come in very handy.

With regards to the parts to raise string 3 on C6th one half step with RKR:
Presently RKR raises 4 and 8 a half step on E9th. (Pedal 7 raises 3 a whole tone.) (RKL lowers 4 and 8 on E9th and lowers 3 on C6th)
You sent a short cross-rod with 2 bell-crank pullers and a welded L-bracket with a riveted little plate at the end of this rod. I can see this cross-rod is intended for the C6-deck. But I have no idea how to connect it to RKR.
Do you have any suggestions?

Hope you can help.

Thanks again and best regards

Peter den Hartogh
<HR></BLOCKQUOTE>

------------------
Peter den Hartogh
1978 Emmons S10 P/P; 1977 Sho-Bud D10 ProIII Custom;
1975 Fender Artist S10; Remington U12; 1947 Gibson BR4;
Internationally Accredited 3D Animation Academy

[This message was edited by Peter on 03 November 2005 at 01:24 AM.]

Posted: **24 Nov 2005 8:02 am**

BUMP

[This message was edited by Sonny Miller on 24 November 2005 at 09:13 AM.]

Posted: **30 Nov 2005 11:49 am**

Thanks Jeff, I got all the parts and alot of extra stuff you put in the box also. Real nice of you, I know moving , can be a big thing, and take quite a bit of time. Good luck to you and the whole Marrs gang.
Sorry , i was perhaps too anxious to get my order, but it was worth the wait.

The Steel Guitar Forum

Where is DUANE MARRS?

Where is DUANE MARRS?