Carl Heatly

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

User avatar
Jerry Dragon
Posts: 482
Joined: 24 Jul 2008 12:08 pm
Location: Gate City Va.

Carl Heatly

Post by Jerry Dragon »

Please answer your pms, you have a few people worried.
Dennis Brown
Posts: 1161
Joined: 6 Mar 2009 5:22 pm
Location: Gowen, Mi. USA

Carl Heatley

Post by Dennis Brown »

Deleted
Last edited by Dennis Brown on 14 Apr 2018 4:20 am, edited 1 time in total.
Doug Cassell
Posts: 72
Joined: 8 Mar 2018 5:37 pm
Location: San Antonio Texas, USA

Post by Doug Cassell »

Add another to the list!
Dennis Brown
Posts: 1161
Joined: 6 Mar 2009 5:22 pm
Location: Gowen, Mi. USA

Carl Heatley

Post by Dennis Brown »

Deleted
Last edited by Dennis Brown on 14 Apr 2018 2:27 am, edited 1 time in total.
User avatar
Jerry Dragon
Posts: 482
Joined: 24 Jul 2008 12:08 pm
Location: Gate City Va.

Post by Jerry Dragon »

there are at least five of us, I have pmed all of you.
User avatar
Jerry Dragon
Posts: 482
Joined: 24 Jul 2008 12:08 pm
Location: Gate City Va.

Post by Jerry Dragon »

Can anyone help us out here? He has supposedly been a member here for ten years? Does anyone know this guy besides us?

Maybe this topic should be moved, I wasn't sure where to post it?
Last edited by Jerry Dragon on 14 Apr 2018 2:42 am, edited 1 time in total.
Daniel Buller
Posts: 23
Joined: 11 Nov 2017 6:30 pm
Location: Colorado, USA

Post by Daniel Buller »

Another concerned customer. No prior experience with him for me until now...
Last edited by Daniel Buller on 12 Apr 2018 9:42 pm, edited 1 time in total.
Wade Blaker
Posts: 22
Joined: 15 Feb 2018 6:49 pm
Location: Indiana, USA

Carl Heatley

Post by Wade Blaker »

I'm going to wait it out. His work looks very good, and with Jerry's parts I hope to wind up with a killer steel.

Even the big builders started out small, some of them may have started building as a hobby. Certainly Carl could have communicated better and this would not have boiled over. Time will reveal the outcome, I am hoping it results in meeting my expectations.
Last edited by Wade Blaker on 14 Apr 2018 7:41 am, edited 2 times in total.
User avatar
Skip Ellis
Posts: 1500
Joined: 17 May 2000 12:01 am
Location: Bradenton, Fl USA

Post by Skip Ellis »

I sold Carl some parts about a month ago and talked to him on the phone - everything went smoothly. Can't imagine there's a problem - hope he's OK. AFAIK, hes a stand up guy, at least he was with me.
2013 Brook Torridge, 2014 Martin 000-18, two homebrew Teles, Evans RE200 amp, Quilter 101R head, understanding wife of 45 years. 'Steeless' at the moment but looking......
User avatar
Jerry Dragon
Posts: 482
Joined: 24 Jul 2008 12:08 pm
Location: Gate City Va.

Post by Jerry Dragon »

he also told me that once he starts really working he shuts off his phone etc and works? Still, I do believe he should be in contact with one of us. I made 87 bell cranks, 12 pedals and 4 pickup changer covers and sent them to him as partial payment. He send me a box of parts to copy which I still have most of them? He told me he had five guitars to build and there are five of us. He has a real deal with me making parts and I find it hard to believe he would not stay in touch. I was supposed to make some changer fingers then knee pedals etc.
Doug Cassell
Posts: 72
Joined: 8 Mar 2018 5:37 pm
Location: San Antonio Texas, USA

Post by Doug Cassell »

He also mentioned to me and others that he was going to Thailand for a few weeks in the near future. He might just be out of touch while in Thailand, but I know he could easily check email or the forum from there.
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

I hope that he surfaces with good news.
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
User avatar
Jerry Dragon
Posts: 482
Joined: 24 Jul 2008 12:08 pm
Location: Gate City Va.

Post by Jerry Dragon »

well, I haven't done anything yet and I don't believe there is much I can do. I paid with a postal money order.
Doug Cassell
Posts: 72
Joined: 8 Mar 2018 5:37 pm
Location: San Antonio Texas, USA

Post by Doug Cassell »

Got an email from Carl this morning. As I suspected, he left town without communicating with anyone. He says he'll be back on 5/10.
Dennis Brown
Posts: 1161
Joined: 6 Mar 2009 5:22 pm
Location: Gowen, Mi. USA

Carl

Post by Dennis Brown »

Deleted
Last edited by Dennis Brown on 14 Apr 2018 2:28 am, edited 1 time in total.
User avatar
Jerry Dragon
Posts: 482
Joined: 24 Jul 2008 12:08 pm
Location: Gate City Va.

Post by Jerry Dragon »

I have no choice but to carry on.
Last edited by Jerry Dragon on 14 Apr 2018 2:42 am, edited 1 time in total.
Doug Cassell
Posts: 72
Joined: 8 Mar 2018 5:37 pm
Location: San Antonio Texas, USA

Re: Carl

Post by Doug Cassell »

Dennis Brown wrote:Best to the rest of you gentlemen, I'm not going to deal with him any longer. I filed my case with Paypal for a refund.
I did the same.
User avatar
Jerry Dragon
Posts: 482
Joined: 24 Jul 2008 12:08 pm
Location: Gate City Va.

Post by Jerry Dragon »

if you had seen them you guys would have loved my parts.
User avatar
Skip Ellis
Posts: 1500
Joined: 17 May 2000 12:01 am
Location: Bradenton, Fl USA

Post by Skip Ellis »

Sorry to see this happen - my dealings with Carl were first rate but he really should have notified folks he would be away.
2013 Brook Torridge, 2014 Martin 000-18, two homebrew Teles, Evans RE200 amp, Quilter 101R head, understanding wife of 45 years. 'Steeless' at the moment but looking......
Dennis Brown
Posts: 1161
Joined: 6 Mar 2009 5:22 pm
Location: Gowen, Mi. USA

Carl

Post by Dennis Brown »

I seen the bell cranks Jerry makes. Very, very nice.
Excellent craftsmanship.
User avatar
Lee Baucum
Posts: 10326
Joined: 11 Apr 1999 12:01 am
Location: McAllen, Texas (Extreme South) The Final Frontier

Post by Lee Baucum »

I am not familiar with Carl Heatley.

Does he build pedal steel guitars?
Lee, from South Texas - Down On The Rio Grande

There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.


Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat
User avatar
Bill Moore
Posts: 2099
Joined: 5 Jun 2000 12:01 am
Location: Manchester, Michigan

Post by Bill Moore »

It seems to me that some of you are jumping the gun a bit. If you were to buy a new guitar from any builder, you might expect a waiting period of a few months to as much as a year. I don't know Carl but I would tend give him the benefit of a doubt. Just my opinion, based on my own experience. If you want a guitar next week, you should be looking at used guitars, not a new one.
Dennis Brown
Posts: 1161
Joined: 6 Mar 2009 5:22 pm
Location: Gowen, Mi. USA

Carl.

Post by Dennis Brown »

Deleted
Last edited by Dennis Brown on 14 Apr 2018 2:29 am, edited 1 time in total.
Doug Cassell
Posts: 72
Joined: 8 Mar 2018 5:37 pm
Location: San Antonio Texas, USA

Post by Doug Cassell »

Bill Moore wrote:It seems to me that some of you are jumping the gun a bit. If you were to buy a new guitar from any builder, you might expect a waiting period of a few months to as much as a year. I don't know Carl but I would tend give him the benefit of a doubt. Just my opinion, based on my own experience. If you want a guitar next week, you should be looking at used guitars, not a new one.
It's not about getting a guitar quickly. It's about a lack of communication giving the impression that he's dropped off of the map.
User avatar
Jerry Dragon
Posts: 482
Joined: 24 Jul 2008 12:08 pm
Location: Gate City Va.

Post by Jerry Dragon »

I tried to delete this thread but as far as I can see there is no way.
Post Reply