| Author |
Topic: Fessenden 3x5 B Pedal wont change 3rd string to A# |
Donnie Stephens
From:
Ohio, USA
|
Posted 17 Mar 2018 11:58 am |
|
Done Thanks Guys
_________________
Too many Guitars! Not enough time!
Last edited by Donnie Stephens on 19 Mar 2018 2:28 pm; edited 1 time in total |
|
|
|
Paul Sutherland
From:
Placerville, California
|
Posted 17 Mar 2018 12:00 pm
|
|
The third string of a normal E9 tuning should be tuned open to G#, and then raised by the B pedal to A. Your title line says A#. Hopefully that's just a typo.
_________________
It don't mean a thing if it ain't got that swing. |
|
|
|
Tucker Jackson
From:
Portland, Oregon, USA
|
Posted 17 Mar 2018 12:27 pm
|
|
| If the pedal doesn't move the string at all, and you've tried adjusting the nylon nut, flip the guitar over. Move the pedal by hand and watch the linkage all the way to the changer. You'll probably spot the problem. It's possible the pull rod has disconnected from the bellcrank and needs to be reattached. |
|
|
|
Donnie Stephens
From:
Ohio, USA
|
Posted 17 Mar 2018 3:17 pm Re: Fessenden 3x5 B Pedal wont change 3rd string to A#
|
|
| Donnie Stephens wrote: |
| I got this guitar a week back.When it came it was almost completely apart.I put it back together.I tuned up the top.Then Started tuning the pedals.A Pedal was fine.The B pedal raised the 6th string fine.The 3rd string would tune up to G easy enough. but won't change with the pedal to A.I think its something simple.But its is giving me a hard time.Most grateful for any help.Thanks |
_________________
Too many Guitars! Not enough time! |
|
|
|
Donnie Stephens
From:
Ohio, USA
|
Posted 17 Mar 2018 3:19 pm Fessenden 3x5 B Pedal wont change 3rd string to A
|
|
| Paul Sutherland wrote: |
| The third string of a normal E9 tuning should be tuned open to G#, and then raised by the B pedal to A. Your title line says A#. Hopefully that's just a typo. |
Thanks.I am so tired of trying to fix this thing.I won't give up!!! Thanks
_________________
Too many Guitars! Not enough time! |
|
|
|
