Show us your Fender triple necks-or other brands too !
Moderator: Brad Bechtel
- Larry Lenhart
- Posts: 2923
- Joined: 12 May 2000 12:01 am
- Location: Ponca City, Oklahoma
Show us your Fender triple necks-or other brands too !
The Fender quads thread seems to have run its course, so how about showing us your T8, either customs or stringmasters...here is one that I just sold, and kinda regret doing so.
and a custom I probably should have kept also:
and a custom I probably should have kept also:
Last edited by Larry Lenhart on 31 Oct 2017 6:52 am, edited 1 time in total.
Zum Encore, Pedalmaster D10, Remington D8 non pedal, Hallmark Mosrite clone, Gretsch 6120 DSW, 1976 Ibanez, Eastman archtop, Taylor Dreadnaught, Telonics pedal, Squire Tele, Squire Strat, Fender Tonemaster, Gold Tone 5 string banjo, Little Wonder tenor banjo, Boss Kamatra 100, 3 Roland cubes 30s and 80, Carvin combo bass amp
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
- Nic Neufeld
- Posts: 1319
- Joined: 25 Sep 2017 8:10 am
- Location: Kansas City, Missouri
Mine's on the way...late 50s SM sold by a fellow forumite. Walnut finish, seen a fair amount of wear over the years. Basically a "relic" version of Doug's, it looks like! I'll treat her nicely.
Doug, I was wondering this recently, about the "bass string neck". What strings did you put on yours, they are obviously of a thicker gauge. Does anyone make sets, or did you have to just buy individually? There's part of me that would like to put flatwounds on it to get a really deep, purring bass tone with minimal scratchiness from the winding...
Doug, I was wondering this recently, about the "bass string neck". What strings did you put on yours, they are obviously of a thicker gauge. Does anyone make sets, or did you have to just buy individually? There's part of me that would like to put flatwounds on it to get a really deep, purring bass tone with minimal scratchiness from the winding...
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
Nic, I have a C6 baritone tuning on the outer neck. I bought the strings individually at my local music store:
[tab]C6 baritone tuning
G .024 w
E .030 w
C .034 w to 38 w
A .040 w to .044 w
G .044 w to .048 w
E .054 w to .058 w
C .064 w to .068 w
A .068 w to .072 w[/tab]
The Fender factory bass tuning was called Amajor/minor, a combination tuning. They put that on the quads (and maybe the T-8s?). I didn't think it was all that useful, so I decided to go with C6.
[tab]C6 baritone tuning
G .024 w
E .030 w
C .034 w to 38 w
A .040 w to .044 w
G .044 w to .048 w
E .054 w to .058 w
C .064 w to .068 w
A .068 w to .072 w[/tab]
The Fender factory bass tuning was called Amajor/minor, a combination tuning. They put that on the quads (and maybe the T-8s?). I didn't think it was all that useful, so I decided to go with C6.
- Bill Sinclair
- Posts: 1545
- Joined: 23 Apr 2014 7:39 am
- Location: Waynesboro, PA, USA
- Nic Neufeld
- Posts: 1319
- Joined: 25 Sep 2017 8:10 am
- Location: Kansas City, Missouri
- C. E. Jackson
- Posts: 1033
- Joined: 8 Feb 2008 2:45 pm
- Contact:
Here's mine.
C. E.
C. E.
My Vintage Steel Guitars
My YouTube Steel Guitar Playlists
My YouTube Steel Guitar Songs
A6 tuning for steels
My YouTube Steel Guitar Playlists
My YouTube Steel Guitar Songs
A6 tuning for steels
- Larry Lenhart
- Posts: 2923
- Joined: 12 May 2000 12:01 am
- Location: Ponca City, Oklahoma
Wow guys, we have seen some beauties so far already, and here I was afraid people would not respond...Robert Jackson has a green one that he posted on another thread-(that one was my inspiration to start this thread) ..his is really striking also...I love the pics of all of these old steels...I think the triple is the right way to go...not nearly as cumbersome as the quad, perhaps not quite the bling of the quad, but a good compromise...I like having that 3rd neck for the Don Helms E13th, even tho I know having the A6th and C6th on the same steel gets criticized for being redundant. I didnt find the triple to be that awkward to lug around, altho I am sure I would the quad.
Zum Encore, Pedalmaster D10, Remington D8 non pedal, Hallmark Mosrite clone, Gretsch 6120 DSW, 1976 Ibanez, Eastman archtop, Taylor Dreadnaught, Telonics pedal, Squire Tele, Squire Strat, Fender Tonemaster, Gold Tone 5 string banjo, Little Wonder tenor banjo, Boss Kamatra 100, 3 Roland cubes 30s and 80, Carvin combo bass amp
- Doug Beaumier
- Posts: 15642
- Joined: 4 Aug 1998 11:00 pm
- Location: Northampton, MA
- Contact:
- George Piburn
- Posts: 2045
- Joined: 1 Jul 2003 12:01 am
- Location: The Land of Enchantment New Mexico
- Contact:
Another Used to Own
GeorgeBoards S8 Non Pedal Steel Guitar Instruments
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel
Maker of One of a Kind Works of Art that play music too.
Instructional DVDs
YouTube Channel
- C. E. Jackson
- Posts: 1033
- Joined: 8 Feb 2008 2:45 pm
- Contact:
My Gibson triple neck.
C. E.
C. E.
My Vintage Steel Guitars
My YouTube Steel Guitar Playlists
My YouTube Steel Guitar Songs
A6 tuning for steels
My YouTube Steel Guitar Playlists
My YouTube Steel Guitar Songs
A6 tuning for steels
- Larry Lenhart
- Posts: 2923
- Joined: 12 May 2000 12:01 am
- Location: Ponca City, Oklahoma
Here is a Rickenbacker Triple I "used" to own:
BTW,this one was really light !
BTW,this one was really light !
Zum Encore, Pedalmaster D10, Remington D8 non pedal, Hallmark Mosrite clone, Gretsch 6120 DSW, 1976 Ibanez, Eastman archtop, Taylor Dreadnaught, Telonics pedal, Squire Tele, Squire Strat, Fender Tonemaster, Gold Tone 5 string banjo, Little Wonder tenor banjo, Boss Kamatra 100, 3 Roland cubes 30s and 80, Carvin combo bass amp
- Nic Neufeld
- Posts: 1319
- Joined: 25 Sep 2017 8:10 am
- Location: Kansas City, Missouri
Very nice! How did she sound? I came very close to buying a Ric tripleneck that was on Reverb.com recently...went with the Stringmaster because it was a better deal, and if pickups ever needed replacing, an $80 Seymour Duncan Antiquity is a lot less painful than a $600 Lollar horseshoe. Still though, the Rics have always tugged at my heart strings (bought a 4003 bass when I was 18, and a huge Yes fan).
- Jim Davies
- Posts: 42
- Joined: 19 Oct 2006 12:01 am
- Location: Charlottesville VA
- Contact:
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
I bought this T-8 Stringmaster new in 1954.
I played it for several years and sold it when I got a Sho~Bud Fingertip pedal steel from Shot Jackson.
Several years later, the fellow who bought it passed away and I bought it back from his widow.
By the looks of the guitar, he must have played it with a claw hammer!
I completely disassembled it, refinished it and put it in the condition you see.
I played it for several years and sold it when I got a Sho~Bud Fingertip pedal steel from Shot Jackson.
Several years later, the fellow who bought it passed away and I bought it back from his widow.
By the looks of the guitar, he must have played it with a claw hammer!
I completely disassembled it, refinished it and put it in the condition you see.
- Larry Lenhart
- Posts: 2923
- Joined: 12 May 2000 12:01 am
- Location: Ponca City, Oklahoma
The Rickenbacker sounded good, but in actuality not as good as my D8 Ricky does...not sure why, perhaps it was the hollow body on that T8...I think you made a good choice going with the Stringmaster...I am trying to swing a deal on one myselfNic Neufeld wrote:Very nice! How did she sound? I came very close to buying a Ric tripleneck that was on Reverb.com recently...went with the Stringmaster because it was a better deal, and if pickups ever needed replacing, an $80 Seymour Duncan Antiquity is a lot less painful than a $600 Lollar horseshoe. Still though, the Rics have always tugged at my heart strings (bought a 4003 bass when I was 18, and a huge Yes fan).
Zum Encore, Pedalmaster D10, Remington D8 non pedal, Hallmark Mosrite clone, Gretsch 6120 DSW, 1976 Ibanez, Eastman archtop, Taylor Dreadnaught, Telonics pedal, Squire Tele, Squire Strat, Fender Tonemaster, Gold Tone 5 string banjo, Little Wonder tenor banjo, Boss Kamatra 100, 3 Roland cubes 30s and 80, Carvin combo bass amp
- Nic Neufeld
- Posts: 1319
- Joined: 25 Sep 2017 8:10 am
- Location: Kansas City, Missouri
Yeah, the R triple I looked at had kind of a hollow box frame but not the metal frame around the edges, it looked like an organ console almost with the side panels. I wondered if that kind of construction could influence sustain. Pretty guitar, to be sure, but destined for someone else!Larry Lenhart wrote: The Rickenbacker sounded good, but in actuality not as good as my D8 Ricky does...not sure why, perhaps it was the hollow body on that T8...I think you made a good choice going with the Stringmaster...I am trying to swing a deal on one myself
Well, as far as the Triple Custom is concerned, I would say it IS nearly as cumbersome as a quad.Larry Lenhart wrote:I think the triple is the right way to go...not nearly as cumbersome as the quad,
That big gap between necks 1 and 2 is almost wide enough to fit another neck and certainly my Custom T8 is pretty much as heavy as my short scale quad.
Most of my gigs currently are on my double neck but when I need more than 2 necks, I usually decide that I might as well take the quad (I use the same gig bag for either).
I agree though that, from the audience perspective, a quad doesn't look half as impressive as if you are standing right next to it.
- Brad Davis
- Posts: 336
- Joined: 7 Feb 2014 1:13 pm
- Location: Texas, USA
To me the D8 seems the best compromise for portability and versatility if you're prepared to re-tune or can just do most of your stuff in a couple tunings. The quad is an impressive beast. I probably really wanted a triple, but ended up with a rare long scale quad. I still rarely use the 4th neck. Either way would be cumbersome to gig with. I'm much more likely to tote my D8 somewhere.
-
- Posts: 203
- Joined: 15 Mar 2014 9:57 am
- Location: Kansas, USA
-
- Posts: 97
- Joined: 25 Jan 2008 3:32 pm
- Location: Florida, USA
Restoration of 1956 Fender Triple Neck Stringmaster
Here are two pics of my almost complete restoration of 1956 Fender Triple Neck Stringmaster
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
- C. E. Jackson
- Posts: 1033
- Joined: 8 Feb 2008 2:45 pm
- Contact:
Nice steel, Erv. I watched a video recently where Jimmy Day played a similar, if not exact, steel on a Jim Reeves performance.
C. E.
C. E.
My Vintage Steel Guitars
My YouTube Steel Guitar Playlists
My YouTube Steel Guitar Songs
A6 tuning for steels
My YouTube Steel Guitar Playlists
My YouTube Steel Guitar Songs
A6 tuning for steels
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA