Page 1 of 1

Peavey Special 130 issues

Posted: 3 Sep 2017 2:35 pm
by Tom Geldner
I have an old Special 130 with the Scorpion Plus speaker in it. It's loud as hell but I've started having a little weirdness with it. I cleaned the pots with Deoxit -- that seems to have helped a bit. BUT, when the reverb is switched in, the amp loses mid and bass, and it induces hum. It sounds almost sparkly.

There are few people who work on these in San Diego and I don't want to throw a bunch of money at it.

Thoughts?

Also, what do the Ken Fox chip mods do for this?

--Edited with additional info

Posted: 4 Sep 2017 7:19 am
by ajm
You say it messes up when the reverb is......switched in.

I take that to mean that you are using it with the footswitch.

Does it work OK without the footswitch?

Also......Do the other footswitch functions work OK (channel switching, etc)?

Posted: 4 Sep 2017 9:27 am
by Tom Geldner
Shouldn't have used the term switched. SB as the reverb is faded in. Footswitch use is irrelevant.

Special amplifier

Posted: 5 Sep 2017 8:23 am
by Mike Brown
Tom, you may send the chassis only with reverb pan and wiring harness to;
Peavey Service Center
Attn; Repair Assistance
412 Hwy. 80 East
Meridian, MS 39301

Please include a copy of this message and your daytime phone number. Without narrowing down the problem, it could be any connection point, etc..