Now available to order custom 10 string practice board.
Keep your chops on the Hudson PB 10
These are available in 10 string and 8 string as well as 6 string models.
These can be custom built to your specs. I offer add on Pickups and output jacks and many colors of stain as options. Can do Kluson tuners or Grovers and others as well.
The 10 string Poplar hardwood base model starts at $219.95 plus shipping.
The one pictured is Ash and will be listed in the for sale section here on the Forum.
You can call from 8AM-9PM EST to order. 704-986-6481
Last edited by Jimmie Hudson on 6 Dec 2020 8:35 pm, edited 4 times in total.
Jim Cohen wrote:Jimmie, have you considered making a keyless version, to keep the overall size down?
I have looked at doing a keyless model. I do not think it would be cost effective on the practice board.
If I come up with a way to do it at a reasonable cost I may then offer keyless.
DG Whitley wrote:Just what the doctor ordered, now need to save up the cash. You are at the top of my list Jimmie.
DG,
That's my red lacquer one in the photo built to pre RP Mullen scale and spacing. Jimmie did an absolutely amazing job!
I'm going to get him to build me an 8 string model tuned to Don HelmsE6 soon
I'm well pleased with the guitar l and you will be too !
Pre RP Mullen D10 8/7, Zum 3/4, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/4, Fender Steel King, 2 Peavey Session 500's, Peavey Nashville 400, Boss DD-3, Profex-II, Hilton Digital Sustain, '88 Les Paul Custom,Epiphone MBIBG J-45, Fender Strat & Tele's, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!!
Jimmie, I sure like that new Lap Steel you came out with. I may just have to order one. There is one on e-bay right now I'm watching. The price is right too.
Zum U-12, Carter SDU-12, Zum Encore, Emmons S-10, Emmons D-10, Nashville 400, Two Peavey Nashville 112, Boss Katana 100, Ibanez DD700, Almost every Lesson Jeff Newman sold. Washburn Special Edition Guitar, Can never have enough, even at 80. 1963 Original Hofner Bass bought in Germany 1963, and a 1973 Framus Bass also bought in Germany 1974.
Jimmie, will it hold a tuning? Had a foot long one that screeched, had to throw away cuz had t fill muffle it and could hear if on it right strings. Would want old AN Gumby head, board and Rick Davis BLUE, what would it cost if I get the Gumby head? Art
"like an old stallion, lonely for freedom, still trying to out run the wind" Seals,Setser,& Davey.
GAS -1969 ZB D11/10,1974 Sho-Bud D10 Professional,1975 Speedy West S10, 150 yr okd Barn Board tele, Beard signature Gold Tone Dean Acoustic/Electric Bass, Tennessee 12 string Bass, 3 String Shovel.2 Fiddles., Sho-Bud amp, Epiphone valve special amp, Fishman loudbox artist amp.
Art Beard wrote:Jimmie, will it hold a tuning? Had a foot long one that screeched, had to throw away cuz had t fill muffle it and could hear if on it right strings. Would want old AN Gumby head, board and Rick Davis BLUE, what would it cost if I get the Gumby head? Art
What you see in the photos is what I offer. It does stay in tune and the sound is good. If you add a pickup they are as good as any lap steel in the price range.
Paul Arntson wrote:What is string spacing at each end and how long is scale length? Thanks. That 12 looks mighty nice!
the string spacing is standard .330
And has the extra holes part drilled at the bridge end for .375 string spacing. The nut can be removed and flipped to make the string slots .375 or any spacing you choose up to .400 or as little as .275
Jimmie built mine custom to match my pre RP a couple years ago and I can’t say enough about how pleased I am with it, it’s performance, and it’s appearance. He also installed a pickup and built it to the same string spacing as my pre RP. Cost me a little extra for the extras but well worth the added expense, and I will say Jimmie Hudson is one of only a couple of people in the world I’d not hesitate to purchase a steel guitar or anything else from sight unseen and without haggling over the price. I’m not one to trust just anyone by any means but Mr Hudson has my unquestioning confidence. ‘Nuff saidðŸ˜
Pre RP Mullen D10 8/7, Zum 3/4, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/4, Fender Steel King, 2 Peavey Session 500's, Peavey Nashville 400, Boss DD-3, Profex-II, Hilton Digital Sustain, '88 Les Paul Custom,Epiphone MBIBG J-45, Fender Strat & Tele's, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!!
William Privitera wrote:Mine stays in tune. I absolutely love it! Thanks Jimmie!
Glad you like it. Thanks
Mine stays in tune as well. No issues
Pre RP Mullen D10 8/7, Zum 3/4, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/4, Fender Steel King, 2 Peavey Session 500's, Peavey Nashville 400, Boss DD-3, Profex-II, Hilton Digital Sustain, '88 Les Paul Custom,Epiphone MBIBG J-45, Fender Strat & Tele's, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!!
Patrick Huey wrote:Jimmie built mine custom to match my pre RP a couple years ago and I can’t say enough about how pleased I am with it, it’s performance, and it’s appearance. He also installed a pickup and built it to the same string spacing as my pre RP. Cost me a little extra for the extras but well worth the added expense, and I will say Jimmie Hudson is one of only a couple of people in the world I’d not hesitate to purchase a steel guitar or anything else from sight unseen and without haggling over the price. I’m not one to trust just anyone by any means but Mr Hudson has my unquestioning confidence. ‘Nuff saidðŸ˜
Thank you Patrick Huey. I am pleases with the build on your guitar as well. I hope you enjoy the guitar for many years
