The Steel Guitar Forum

What brand of Steel do you play and what set up. Also how many pedals and knee levers.I play a 2004 Emmons LaGrande III SD-10 with 3 pedals and 5 Knee levers.No affects strait from the new Nashville 112 with three cords.
Sam White

I play a Pedalmaster D10 8 and 5 . A Goodrich Steel Driver 111 to a Goodrich volume pedal to a Peavey Profex 11 to a Peavey Nashville 112. Jody.

MSA Millennium S-12U 8&5,
Hilton Pedal,
Walker Stereo Steel comboamp,
Digitech Processor (delay & reverb),
2-Peavey 15" Black Widow cabinets,
BJS 15/16-12 string bar,
3 (slow) fingerpicks & thumb and an even slower brain... <Weak Link..there's always gotta be one!

Carter S 10 5+5.. Old Fenders ONLY...Cheap guitars.... mediocre ability.. size 12 shoes..thinning hair.. very bad back.. really bad breath.. diminishing sexual desire..

74 Emmons D-10, black,9 and 6..Russ Hicks was the original owner but I have had her since about 77 or 78..Emmons setup but RKL lowers E`s
Stewart world 1.2 amp
Roland GP-100
Goodrich LDR pedal
Peavey 15" BW speaker cabs
mid 70s Peavey Session 400
BL-710 pickups

Hook
------------------
HookMoore.com
Allen Moore


<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Hook Moore on 28 January 2005 at 07:53 PM.]</p></FONT><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Hook Moore on 28 January 2005 at 07:55 PM.]</p></FONT>

I play a Zum D10 8x5 Emmons setup. black mica to. through a session 500rd with JBL. no effects yet, tryin to sell an amp to get a pod xt.
Terry

------------------
Zum D10 /8x5 / session 500rd/ American Strat Highway 1 model
steelin for my Lord

<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Terry Sneed on 28 January 2005 at 08:16 PM.]</p></FONT>

2002 Black/Ebony mica Carter D-10 8/7
Emmons set-up
Goodrich Steeldriver III
Hilton volume pedal
Boss RV-3
Boss DD-5
Boss Pitchshift/Delay
75 Session 400 amp

Some altenate set-ups

66 Emmons D-10 8/8
Hilton volume pedal or Goodrich LDR
Pro-Fex II
2 Session 400's 75-76

71 Emmons D-10 9/8
Emmons volume pedal
Transtubefex
69 Standel or 69 Musicman
or any combination of the above

------------------
Jim Smith jimsmith94@comcast.net
-=Dekley D-12 10&12=-
-=Fessenden D-12 9&9=-
-=Emmons D-12 push pull 9&9=-
Stereo Steel rig w/Boss GX-700
IVL SteelRider w/JV-1080

Sho-Bud Professional 8 & 4 w/Emmons setup. Bought it new in 1970 & had Bobbe Seymour add the 2 exra knees several years ago.

------------------
Sho-Bud: Professional & Fingertip

Zemmenden

Sho~Bud original model Pro II, probably about a 74 model, with 8 & 4 straight into a Zumsteel volume pedal, and that direct into a Peavey Nashville 112 amp.

85 push-pull/with TT's. Hilton pedal, SE-200 Evans amp.

'80 somethng MCI Waco, black mica, D10 8+5, '68 ZB 11/10, 8+3. Pod 2.0, NV 112. Harmony Lap Steel, An Ancient Dobro Angelus.

Well lets see, '77 MSA Classic SS 8&8, '97 Fessenden 8&8, '99 Williams 8&8, two '75 Emmons P/P's 8&6, all D-10's, all with a modified Day setup. At home I usually play through a Boss SE-50, into a Session 500 with the crossover going to a Peavey Basic 60 bass amp. At church, I play through a Digitech 2112 direct into the board through a Countryman DI, and monitor with Shure PSM600 in-ear monitors, no amp. If I play anywhere else, I use a Digitech 2112, with either a Mosvalve 500, or a Peavey Classic 50/50 power amp into two 1202-4 Black Widows in custom, closed back cabinets. Whew, I thinks thats all. OOPS, one more thing, when I record, I plug directly into an old LTD400 or a Nashville 112 with just a little reverb and handle the rest of the effects with a Kurzweil KSP8 in the studio. I usually use two mics on the amp.

------------------
Darvin Willhoite
Riva Ridge Recording

Ormston pedal steel into a Peavey Vegas. Pre amp out of the Vegas (on the back panel)into patch circuit on front panel of Peavey Session 500. Total control over both amps.
R B

2003 Mullen SD-12 E9 3+4 Black mica
Hilton volume pedal
Nashville 112

Simple and sounds great .

2000 Williams 12 string universal with 8&5 keyless with 400 series changer, Nashville 400, Alesis Midiverb-4. The Sho-Bud Pro-1 stays in the case most of the time. 1976 Vibrasonic.

------------------
Playing For JESUS,LC. WILLIAMS U12,SHO-BUD PRO1,CARVIN TL60,GIBSON LES PAUL CUSTOM,YAMAHA L-10A ACOUSTIC,ROLAND JW-50 KEYBOARD,G&L AND BC RICH BASS'S

I play an Emmons LeGrande III. It is a Double 10 with 8&5 and black in color. I use a SteelDriver and an Alesis Quadraverb while playing through a Peavey Nashville 400 amp. My volume pedal is A Goodrich 120 and I use George L's cables

Emmons Push Pull 1982 D10 8x4 with Wallace True Tones to Brad Sarno Black Box to Hilton volume pedal to Profex for effects only to Nashville 400.
Awaiting delivery of Promat.

emmons skh legrnde 8x5 black
d10
evans se150
evans 300
lexicon alex
dtr1000 tunner
gary phillips rack
hilton vol ped

2004 SD10 Derby 3 & 5 with a Nashville 1000

Normal set-up is 98 Zum D-10 8/5 with Walker Stereo combo with digitech. Also have 69 Emmons D-10 pp 8/4, 73 MSA Clasic D-10 10/4,70 something Sho-Bud professional D-10 8/4,all with Emmons set up. Parker non pedal S-10 with E-66 pickup C-6 with D on top.

Other amps include Sho-Bud(last night),Peavy Nashville 400, and Fender black face twin(pre cbs)with 15" JBL.

1. Emmons Legrande II SD-10 w/3&4
2. Dekley Model 001 SD-10 w/3&4 w/5th being built.
3. Dekley SD-10 student model in a massive state of disarray 'cause it's so much fun to take apart and put back together again. Kinda like LEGO's.

Does a Dekley D-12 come with it's own transport trailer? <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Ray Minich on 29 January 2005 at 09:02 AM.]</p></FONT>

Fessemmons

------------------
<small>Larry Bell - email: larry@larrybell.org - gigs - Home Page
2003 Fessenden S/D-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps

Carter D10..9+8...Goodrich 120..Peavey Profex(delay only) Nashville 400 and AB to a Fender Hot Rod Deville 2x12 which I use for the Tele or Strat..