Does anybody know? Fender tuners and pans...

[Dan Campbell]

Does anybody know the exact size of the pocket Fender bores out in order to insert their pans and tuners? Height, depth, width??? Dan

[Dan Campbell]

Can anyone tell me the vertical and horizontal measurements on your Fender -- even if you don't know the depth. Absolute numbers are not important right now. Thanks Dan

[Tommy Adams]

Hi Dan, I measured the cavity in my stringmaster and it measured 2 7/8" on the small end, and 3 1/4" on the wide end next to the tuning nut. The cavity was 3/4" deep on the small end, and 1" deep next to the tuning nut. The cavity hole was 4 1/8" long. Hope this helps. Tommy

[John Rosett]

The 1951 T-8 I have measures 3 7/8" long, and 2 1/2" wide. The depth varies from 1" at the nut end to 3/4" at the end. I recently took the tuner pans off and put them on an earlier body, and had to remove some wood to make them fit.

[Dan Campbell]

Thanks for your help guys!