Good steel reverb recommendations anyone?
Moderator: Shoshanah Marohn
- Claire Winter
- Posts: 30
- Joined: 7 Mar 2012 9:32 pm
- Location: Washington, USA
Good steel reverb recommendations anyone?
A good pedal steel sound needs an exceptionally good reverb on it when called for, especially in the upper registers. I've tried a couple of Alesis digital versions and am underwhelmed. Anyone have recommendations on a good reverb, preferably with a pedal switch on it? I'm pretty new at this, so any advice is appreciated. Thanks!!
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
- John Swain
- Posts: 1576
- Joined: 12 Feb 2000 1:01 am
- Location: Newberry,SC
- Ray Montee
- Posts: 9506
- Joined: 7 Jul 1999 12:01 am
- Location: Portland, Oregon (deceased)
- Contact:
Amp reverb used and appreciated.
I've always used the PEAVY in amp reverb and found it to be an excellent unit.
Likewise, the Holy Grail is a solid unit.
Likewise, the Holy Grail is a solid unit.
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
-
- Posts: 380
- Joined: 15 May 2013 9:46 am
- Location: Arkansas, USA
The Boss RV-3 is a good starting point. Lloyd "Mr. Nashville Sound" Green used one for years (may still?), so that tells you a lot about them right there. It has a great reverb and the added bonus of a delay that can be mixed and matched with the reverb for plenty of great sound options. They're not in production any more but can be found on eBay all the time. Should be able to pick one up for less than $100.
Drew Pierce
Emmons D10 Fatback, S10 bolt-on, Zum D10, Evans RE500, Hilton volume and delay pedals.
Emmons D10 Fatback, S10 bolt-on, Zum D10, Evans RE500, Hilton volume and delay pedals.
- John Booth
- Posts: 2036
- Joined: 25 Oct 2014 9:17 am
- Location: Columbus Ohio, USA
- Richard Sinkler
- Posts: 17067
- Joined: 15 Aug 1998 12:01 am
- Location: aka: Rusty Strings -- Missoula, Montana
- Chuck Blake
- Posts: 918
- Joined: 8 Aug 2011 8:49 am
- Location: West Virginia, USA
-
- Posts: 1894
- Joined: 6 May 2007 7:00 am
- Location: Somewhere in the swamps of Jersey
- Mark Wayne
- Posts: 689
- Joined: 27 Nov 2006 1:01 am
- Location: Wisconsin, USA
- Contact:
After nearly 30 years of digital reverbs (Boss's, Lexicon MPX 500, Verbzilla, Alesis Quadraverbs), I switched to the "Room-mate" tube reverb pedal, by T-Rex, about 3 years ago. It's kind of picky, but lush and thick. Kind of reminds me of the higher caliber studio Lexicons.
The Room-mate has all your mix, decay, level and gain choices....but it also has a hi-cut knob to reduce the highs on the tail of the reverb, making a pretty smooth decay. A nice "Spring" setting, also.
I think I just talked myself into buying another one
The Room-mate has all your mix, decay, level and gain choices....but it also has a hi-cut knob to reduce the highs on the tail of the reverb, making a pretty smooth decay. A nice "Spring" setting, also.
I think I just talked myself into buying another one
Mark Wayne Krutke
****markwayne.biz****
****markwayne.biz****
- Tony Glassman
- Posts: 4470
- Joined: 18 Jan 2005 1:01 am
- Location: The Great Northwest
- Garry Vanderlinde
- Posts: 1500
- Joined: 14 Nov 2002 1:01 am
- Location: CA
- Claire Winter
- Posts: 30
- Joined: 7 Mar 2012 9:32 pm
- Location: Washington, USA
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
- Richard Sinkler
- Posts: 17067
- Joined: 15 Aug 1998 12:01 am
- Location: aka: Rusty Strings -- Missoula, Montana
I haul around a big bathroom with a shower, and play in the shower.Erv Niehaus wrote:Or you could just set your guitar up in a big restroom.
That's how they used to do it before electronics.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
- Howard Parker
- Posts: 2610
- Joined: 4 Aug 1998 11:00 pm
- Location: Clarksburg,MD USA
- Contact:
- George Seymour
- Posts: 870
- Joined: 14 Nov 1999 1:01 am
- Location: Notown, Vermont, USA
Neuaber is excellent, I have the stereo wet reverb and find it superb. It can also be programmed with download from Neuaber to perform delay and reverb, I've not tried this yet, should though...Tony Glassman wrote:People were pretty high on the Neunaber "Wet Reverb" pedal for a while. i've ever tried or heard one but have always been tempted. Any users?
Strymon Blue Sky is a great choice for stand alone reverb more options and controls, and $300, I use Strymon Brigadier Analog delay in conjunction with the wet reverb, very, very nice.
Simply put the electronics today are all good, I used the Peavey Profex for years, but in today's technology it was quite noisy.... To the original poster...you can try any of the suggestions mentioned and really threre are huge selections of electronics and the choices can be staggering, it will all come down to what you like and want to hear to please you.
Old Emmons D-10's & Wrap Resound 65, Standel amps!
Old Gibson Mastertones
Old Gibson Mastertones
-
- Posts: 5857
- Joined: 4 Aug 1998 11:00 pm
- Location: Oceanside, Calif, USA
- Contact:
- Dale Rottacker
- Posts: 3513
- Joined: 3 Aug 2010 6:49 pm
- Location: Walla Walla Washington, USA
- Contact:
I used the built in Peavey Reverbs for my first 100 years... in the 2nd 100 years I’ve used both the Profex ll and now have settled on the Lexicon MPX1 with the Buddy Castleberry presets added.... I’ve been using the John Hughey Parallel setting... 222 on mine, and can’t seem to get away from it, I love it... it has both Reverb and Delay in it.... Very Tasty
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
- Richard Sinkler
- Posts: 17067
- Joined: 15 Aug 1998 12:01 am
- Location: aka: Rusty Strings -- Missoula, Montana
- Roger Dillingham
- Posts: 303
- Joined: 2 Jan 2009 3:24 pm
- Location: Kentucky, USA
Good reverb for Steel
Hello Claire! I have always thought of myself as somewhat of a "reverb connoisseur" as I have been hard to satisfy when it comes to "that sound". I have a Neunaber Stereo Wet Reverb which comes awfully close to the sound I have been looking for all my playing career. It's really great! In a rack mount I have a Lexicon MPX-1 with the John Hughey settings and there are some fine reverb sounds in that unit. I have just recently obtained a T C Electronics rack mount effects unit, a M-One XL, which is supposedly well known for its reverbs. I have yet to try it out, but will gladly let you know if it's a winner. I purchased a Digitech Hardwire RV-7 reverb pedal several years ago, which also contains some good Lexicon reverbs, but it doesn't quite come up to the Wet Reverb pedal. For dollar spent, I don't believe you can do any better than the Neunaber Wet Reverb, Mono or Stereo version. JMHO
Roger
Roger