| Author |
Topic: Shobud pedals |
Chris Langman
From:
Melbourne, Victoria, Australia
|
Posted 26 Apr 2004 6:47 am |
|
| I am having a bit of trouble rolling my ankles over on my old Pro 1 with the wide pedals, due to an old injury. I feel that narrower pedals would help me out of this predicament. Are replacement narrow pedals available? I would hope that if they exist, that they could be a straight changeover, without any modification neccessary.....does such a kit exist??? |
|
|
|
Jerry Hayes
From:
Virginia Beach, Va.
|
Posted 26 Apr 2004 10:41 am
|
|
Hey Chris,
I had the same problem in '77 or '78 when I got my old ShoBud S-12. I knew a player in LA then named Sergio Tuccironi who had taken his guitar to ShoBud and they cut the pedals off with a bandsaw. I took mine off the pedal rod and just put each one in a vice and took a hacksaw and cut some off of each side until they were the right width. You've got the grating on top to guide the saw so you make a straight cut. It's easy and a good thing to do. You can fine sand the sides of the pedals after you cut them and they'll be fine. There's no need in investing in new pedals....Have a good 'un, JH
------------------
Livin' in the Past and the Future with a 12 string Mooney Universal tuning.
|
|
|
|
Gary Goodman
From:
Covina, California, USA
|
Posted 26 Apr 2004 9:21 pm
|
|
Rayline has narrow sho-bud pedals and a lot of sho-Bud parts. Also check with Duane Marrs
rayline@rlpsg.com
marrsofmadison@aol.com
Gary Goodman
------------------
Sho-Bud LDG, Evans Fet 500, Nashvill 400, Hilton volume pedal |
|
|
|
