Tunings and intonation

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

User avatar
Søren Stevnsgaard
Posts: 9
Joined: 27 May 2014 8:42 am
Location: Denmark

Tunings and intonation

Post by Søren Stevnsgaard »

Hi

I know this topic has been discussed quite in the past, but Im still in the need of advice on this. I've just upgraded my Stage One to a second hand WBS custom, and Im very excited with it. It sounds as good as I hoped in any way. But, it also showed me how bad I am at intonating, and how important it is to find the right tuning.

On the Stage One I used Petersons sweetened tuning that i programmed on my cleartune app, but practising for a studio recording, I experienced some challenges with intonation. I then tried just-intonation: http://www.b0b.com/infoedu/just_e9.html and Hybrid: http://www.larrybell.org/id32.htm, but they just gave me other problems. I ended up using the hybrid for the recording, and then worked the bar around it. It worked ok, and I know that i won't find a 'perfect tuning'. But I wanna find a good basic tuning, and then learn to use that, and maybe do my own small changes to it.

Questions: What tuning do you use and why? And, what do you do to compensate? ie moving bar, or avoiding pedal combinations, or specific chords?

Thanks,

/Soren
User avatar
Scott Duckworth
Posts: 3470
Joined: 6 Apr 2013 8:41 am
Location: Etowah, TN Western Foothills of the Smokies
Contact:

Post by Scott Duckworth »

Buddy Emmons Tempered Tuning

http://www.buddyemmons.com/ttchart.htm

I tried all the rest, and they didn't work.
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it

I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

If you're gonna record with other instruments, I recommend going closer to ET. Guitars, keys, fretted basses, most horns are all in ET.
Since I find ET thirds a tad jangly, I've gone to the following compromise: D#, E#, G# & C# all a mere 4 or 5 cents flat, everything else straight up.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
User avatar
Steve Lipsey
Posts: 1900
Joined: 9 May 2011 8:51 pm
Location: Portland, Oregon, USA
Contact:

Post by Steve Lipsey »

I give a hearrty +1 to Lane's tuning....you will sound good with the band, and by yourself. It isn't "perfect", but neither is the world around us. It reduces the beats of chords by flatting thirds enough to sound good, but no so much that you sound bad with other instruments. And you can do it with a plain old boss TU-2 guitar tuner!! Just tune those thirds one light down from straight up...no programming, easy to see.

One mod I use is to NOT detune the C# that is string 5 with the C pedal - that typically is the root of a chord, not a third, and is better left straight up. Also, the E-F change should be flatter than the others (doesn't relaly matter how much) because it is a third to notes that are already flatted by the other adjustments, and so needs to go down a bit beyond them.

This method sounds great and it isn't critical at all to get the detuned notes exactly down by a specific amount - you won't hear it if they are off by a bit. The goal for the thirds is just to reduce the beats, not to be exactly in tune iwth anything...

This method was incredibly liberating, and sounds great with the band...what more could you ask?

Note that I'm not criticizing in any way the more complicated JI tunings - I'm just saying that this works for me and for others, and may be worth giving it a try...tuning is a very personal thing with this crazy instrument...
www.facebook.com/swingaliband & a few more....
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham "CooderNator" archtop parlor electric reso w/Fishman & Lollar string-through
Ben Bonham "ResoBorn" deep parlor acoustic reso with Weissenborn neck and Fishman
Ben Bonham Style 3 Tricone., 1954 Oahu Diana, 1936 Oahu Parlor Squareneck
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

one thing you can try which worked for me is going the style of the newman chart but bringing all the offsets back in as close as you can stand. so your sharped and flatted settings are still fairly close to 440 or whatever you use as a center point.
the e to f raise is noticeably the flattest.
User avatar
Søren Stevnsgaard
Posts: 9
Joined: 27 May 2014 8:42 am
Location: Denmark

Post by Søren Stevnsgaard »

Thanks. I'll give them a go.

Cheers,

/Søren
User avatar
James Holland
Posts: 228
Joined: 2 Feb 2012 7:49 pm
Location: Alabama, USA

Post by James Holland »

I'm new, but I'm definitely a fan of the Emmons tempering, or something close to it. To me, one of the defining characters of pedal steel are the perfect thirds and fifths. Dont fiddles and vocals use perfect thirds and fifths? I tried equal temperament and I thought it sounded awful?
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

Vocals, fiddles, trombones and steel guitars CAN do JI thirds.
BUT if there are keys and fretted instruments around, they might not want to. Competing thirds can clash. Remember that guitars often play SHARP thirds, since oversqueezing the strings will sharp them.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
Donny Hinson
Posts: 21192
Joined: 16 Feb 1999 1:01 am
Location: Glen Burnie, Md. U.S.A.

Post by Donny Hinson »

I tune JI, and don't try to "sweeten" anything. If there are a few intervals and chords that don't sound good, then I just don't play them...or I substitute something simpler that is in tune.

The world isn't going to end (and I'm not going to get fired) if I can't play a 7-note chord, like a minor 11th, in perfect tune. :?
Ask Kjaergaard
Posts: 34
Joined: 8 Jan 2009 1:50 pm
Location: Aarhus, Denmark

Post by Ask Kjaergaard »

Steve, you mentioned using a Boss TU-2 tuner, and I would like to do the same, using the tuning that Lane and yourself describe. But how many cents is one light on a Boss TU-2?

I am currently using a TU-3, which has more lights than the TU-2... so how many cents is one light on the TU-3?

I found no answer in the owners manual...
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

Donny Hinson wrote:I tune JI, and don't try to "sweeten" anything. If there are a few intervals and chords that don't sound good, then I just don't play them...
Thank you Donny - that's heartening. I tune my U12 in JI because natural intervals are what attracted me to the steel, and ET is what repels me from the piano. As a consequence my 7th string is too sharp to use as the root of F#m - but there are plenty of other minors. String 5 has two C# raises - one for pedal A to give the A/B chord and one for P7 which is slightly sharper to match string 7. I love the sound I'm getting. I did tune to ET once as an experiment, but only once.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

Ask, if you are a smartphone user, there are plenty of free tuner apps (if you have an 1/4" to 3.5mm adapter, you can plug the steel into the mic input of your computer, and there are both Windows and Mac tuner apps).
You could also try tuning the E major chord by ear and checking how flat the 6th and third strings are (if you tune til it sounds the sweetest, it'll be 8 cents flat), and tune the E#, G#, D# and C# to HALF that flat.
I'm not familiar with the tuners you have.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
Ask Kjaergaard
Posts: 34
Joined: 8 Jan 2009 1:50 pm
Location: Aarhus, Denmark

Post by Ask Kjaergaard »

Thanks, Lane. I will try your advice.

As for the Boss tuner/cent issue, perhaps Steve Lipsey could clarify this, as he uses the TU-2?
User avatar
Michael Coggins
Posts: 90
Joined: 8 Nov 2013 5:31 pm
Location: Sligo, Ireland

Post by Michael Coggins »

Ask Kjaergaard wrote:Steve, you mentioned using a Boss TU-2 tuner, and I would like to do the same, using the tuning that Lane and yourself describe. But how many cents is one light on a Boss TU-2?

I am currently using a TU-3, which has more lights than the TU-2... so how many cents is one light on the TU-3?

I found no answer in the owners manual...
Just checked my TU-3 against my Seiko cent tuner...
1 light = 5 cent
2 lights = 10 cent etc
Mullen Royal Precision SD10, 2002 Fender Telecaster, Alden Mandocaster, Boss Katana 100-212, Stage One V/P, Tom Bradshaw Resonator Pedal. Wampler Paisley Drive, Wampler Ego Compressor, Boss Super Chorus, Simble Overdrive.
Ask Kjaergaard
Posts: 34
Joined: 8 Jan 2009 1:50 pm
Location: Aarhus, Denmark

Post by Ask Kjaergaard »

Thanks, Michael. Very good to know!
User avatar
Steve Lipsey
Posts: 1900
Joined: 9 May 2011 8:51 pm
Location: Portland, Oregon, USA
Contact:

Post by Steve Lipsey »

Ask-
I use 1 light down from in-tune on the TU-2 and use the pair of lights lit just below the green in-tune light on the TU-3. I actually use the TU-3 mostly.

So i guess I'm using about 7 cents down. That seems to balance reducing the audible beats in a chord as much as I can while still being in tune with guitars in band....you can pick your own comfort level on this.

I leave the tuner plugged in to the volume pedal tuner out and always on - easy to quickly check tuning in between songs....and the big lights on the Boss are easy to see, don't have to look for a needle and figure out where it is on a scale...plus the TU-3 has a nice "superbright" mode which is great when playing outside in a sunny place...

I really use A+F and other "difficult" chord forms a lot, which this tuning completely allows, because it isn't looking for perfection in other forms....especially where "perfection" is out of tune with the guitars in the band...there are lots of ways to think about tuning, Lane's way lets me sound fine and play with the band and use all the lever/pedal combos, although you can hear the "imperfections" if you play by yourself and listen for them....just like a 6-string guitar now sounds really out of tune to me now, since I've learned to hear the beats in the chords....but that is the way the world tunes, so I just go with it...(for the A+F change, remember to tune the E->F raise another set of lights down to make it work as a third with the notes that are already tuned down)
www.facebook.com/swingaliband & a few more....
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham "CooderNator" archtop parlor electric reso w/Fishman & Lollar string-through
Ben Bonham "ResoBorn" deep parlor acoustic reso with Weissenborn neck and Fishman
Ben Bonham Style 3 Tricone., 1954 Oahu Diana, 1936 Oahu Parlor Squareneck
User avatar
Sid Hudson
Posts: 861
Joined: 16 Jul 2011 7:48 am
Location: Virginia, USA
Contact:

Post by Sid Hudson »

Buddy once told me, anytime he plays with a piano he tunes his C neck every string to 440 straight up.

He cautioned me. "It will sound out of tune when you play by yourself but when playing with the Piano it will sound really good in Tune".

I shouldn't need to tell you, he was right!
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

How satisfying it is to the scientific mind when theory is borne out in practice! :)
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
User avatar
Bob Russell
Posts: 511
Joined: 1 Jun 2011 10:14 pm
Location: Virginia, USA
Contact:

Post by Bob Russell »

Ian Rae wrote:How satisfying it is to the scientific mind when theory is borne out in practice! :)
:D :D :D
Lots of stringy things, many of them slidey.
Ask Kjaergaard
Posts: 34
Joined: 8 Jan 2009 1:50 pm
Location: Aarhus, Denmark

Post by Ask Kjaergaard »

Steve, I like the simplicity of this tuning method, and is definitely going to experiment with it.

Do you also use this method on the C6 neck? If so, what notes/strings do you adjust?
User avatar
Steve Lipsey
Posts: 1900
Joined: 9 May 2011 8:51 pm
Location: Portland, Oregon, USA
Contact:

Post by Steve Lipsey »

I don't play C6- you can use the theory behind this method to give it a try... Or maybe Lane has some advice....
www.facebook.com/swingaliband & a few more....
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham "CooderNator" archtop parlor electric reso w/Fishman & Lollar string-through
Ben Bonham "ResoBorn" deep parlor acoustic reso with Weissenborn neck and Fishman
Ben Bonham Style 3 Tricone., 1954 Oahu Diana, 1936 Oahu Parlor Squareneck
User avatar
Lane Gray
Posts: 13551
Joined: 4 Aug 1998 11:00 pm
Location: Topeka, KS

Post by Lane Gray »

For C6, I use the same mental approach. Flat the tones most often used as thirds 4 cents.
A, B, C#, F# and E.
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
Kevin Hatton
Posts: 8173
Joined: 3 Jan 2002 1:01 am
Location: Buffalo, N.Y.
Contact:

Post by Kevin Hatton »

Learning to play a steel guitar in tune is an art. Some people just don't have the ears for it and will never get it. Being in tune doesn't men that you can play a steel guitar in tune. I've seen master players play wildly out of tune steels at outdoor concerts in tune with bar adjustments. It's an instinct. It took me years and some advice from master players to understand this. This borders on something that can't be taught. It's like Zen.
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

Or trombone.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
User avatar
Clete Ritta
Posts: 2005
Joined: 5 Jun 2009 6:58 pm
Location: San Antonio, Texas

Post by Clete Ritta »

Steve Lipsey wrote:...tune those thirds one light down from straight up...
I often play along with a Roland digital keyboard in ET. I check my tuning on E9 open strings with a Boss TU-2 just like that too. Everything green (straight) but strings 3 and 6 one red light left of center (sweetened flat).

The pedals and levers rarely need adjusting. I tuned them by ear so it sounds good. Similar to the Emmons chart by the looks of it but never checked exact cents.
Lane Gray wrote:...most horns are all in ET...
I thought horns were closer to JI. Don't they play natural overtones of the harmonic series?
Søren Stevnsgaard wrote:...what do you do to compensate? ie moving bar, or avoiding pedal combinations, or specific chords?...

All pedal/lever combinations are valid. The chords produced are where you will discover what works and what does not with each combination. For instance, when using A/F pedal/lever combo with your major chord grips, it sometimes sounds more in tune by positioning the bar slightly towards the left side of the fret instead of directly over it. This is an example of a compensation for tuning.
Last edited by Clete Ritta on 12 Jun 2015 3:57 am, edited 1 time in total.
Post Reply