Page 1 of 2
Steelers Choice Seat; back or no back?
Posted: 14 Oct 2002 4:06 pm
by Sam Minnitti
I am contemplating the purchase of a Steelers Choice seat and would like to hear opinions on getting it with or without a back.
My main question… does the back actually provide lumbar support while playing with correct posture, or is it there just to lean back on while not playing.
Thanks for sharing.
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Sam Minnitti on 14 October 2002 at 05:07 PM.]</p></FONT>
Posted: 14 Oct 2002 4:07 pm
by Herb Steiner
Posted: 14 Oct 2002 5:34 pm
by Jim Smith
I like having a back on my seat, but only use it when laying out and between songs.
Posted: 14 Oct 2002 5:56 pm
by Kevin Hatton
Same as above. Absolutely the best seat, but the back is not really used when playing. I vote for the back though.
Posted: 14 Oct 2002 6:05 pm
by Herb Steiner
Sam
I didn't make myself clear with my first post. I don't use the back rest when playing, but for supporting myself when I'm not playing. This is between songs as well as between solos and fills during songs, since in the bands I'm in I frequently am not required to be making any sounds whatsoever.
You'd be surprised at how much energy is spent just keeping yourself upright during an evening of playing. I find the lumbar support to be absolutely necessary. I've been playing on Kenn Rollans' seats since 1987, and I have three now... two in my music room and one with the band equipment.
When my seats get worn down, I send them to Kenn and he repads and reupholsters them, generally does a touchup. First class product, and one of the good guys.
There are others out there that make a fine product also, but I speak from my experience with the Rollanses.
------------------
Herb's Steel Guitar Pages
Texas Steel Guitar Association
Posted: 14 Oct 2002 6:49 pm
by chas smith
I have both and the one with the back is extra wide and long, (the couch version). The "couch" holds a lot more stuff, like PV MIDI faders and cables plus all the normal accessories and for an 8 to 12 hour session, having a back is the way to go.
Posted: 14 Oct 2002 7:15 pm
by Jeff Lampert
I tried an Elite seat with a backrest and hated it. The thing to examine is how you sit when you play. I slouch a bit when I play, so the seat back pushed uncomfortably into my back, forcing me to sit uncomfortably straight up. If you get a seat back, get a guarantee that you can return it if you are unhappy. I was able to return mine for full money back.
Posted: 14 Oct 2002 9:08 pm
by Jerry Roller
I would hope that what Jeff said would not lead anyone to think the Elite in not a fine seat. I have two Elites and a Steelers Choice and both are fine seats. I sit pretty much on the front edge of the seat and use the backrest when I am laying out or between songs. My back does not touch the backrest when I am playing at least not all the time. Jeff described his posture when he plays and he might prefer to sit back further in the seat. I have sold many Elite seats and only had one person not satisfied with it and I offered to gladly take it back with a full refund and Jeff took me up on the offer.
Jerry
Posted: 15 Oct 2002 3:31 am
by Fred Shannon
I use a Steeler's Choice with a backrest and I must admit when I first got it, the backrest was in a more straight up position than I liked. However, I removed the backrest, used a file and cut the backrest supports on more of a slant and it works for me. I, too, just use the backrest on lay outs, but I'm glad to know it's there. Helps this old fat boy's back on those long tiring gigs.
------------------
The spirit be with you!!
Posted: 15 Oct 2002 4:18 am
by Steve Stallings
I've got two of these with backs. One of them stays out with the band and one stays here at home. I've tried seats without backs and didn't care for them. Ken is a really great guy who stands behind his product.
God Bless
Steve
Posted: 15 Oct 2002 5:13 am
by Jeff Lampert
Jerry,
Sorry about that. I was definitely not criticizing the Elite. It was quite some time ago, but I recall that it actually looked like a very well-made seat. I just can't use a backrest on ANY seat. I would certainly suggest to anyone interested in a good seat to consider the Elite. And you were very fair about returning my payment. Your policy is to insure a happy customer, and I appreciate that.
Posted: 15 Oct 2002 8:05 am
by Bob Shilling
Like Herb said. You really can't lean back on it while you are actually playing, but in between it's great. I have the sidekick seat, with the small box on the side where you can keep picks, bars, strings, pencils, tuning wrenches and stuff without having to lift the seat to get at it. I can't see why anyone wouldn't want that.
I have the power strip on mine also, but I don't really use it except when some other band member needs it.
------------------
Bob Shilling, Berkeley, CA--MSA S10, "Classic"
Posted: 15 Oct 2002 12:32 pm
by Stephen Gambrell
Herb, you are one lucky man! I have to get my wife to support me when I'm not playing
Posted: 15 Oct 2002 1:08 pm
by Bill Moore
I've had the same, backless, seat for many years, I think it is an old Sho-Bud. I don't think I would use one with a back, I tend to sit on the foward half of the seat. Moving to a position where I could actually use a back rest seems to put me in a position where it's not comfortable to use the knee levers. I have seen lots of good players who have the seat nearer the guitar and even lean back on the rest while playing, I don't think it would work for me.
------------------
Bill Mooremy steel guitar web page
Posted: 16 Oct 2002 4:54 pm
by Tim Harr
Steelers Choice Steel Guitar Products
Ken Rollans
(501) 565-6453
Also builds Speaker Enclosures and Rack Cases (w/ patch bay)
Ken lives about 20 miles from me. He is a fantastic person and produces a FIRST CLASS product. I have the side kick seat with back and power..
If you are even thinking of buying a new Steel Seat, CALL HIM and just talk with him for a few minutes...you will not only be sold on his seat but you will be sold on his service.
I have a seat I bought ten years ago and have sat on in venues Worldwide....
He offered to take my old seat and completely refurbish it with all new parts, cusion, material, etc... for F R E E !!
He is always sending replacement parts to customers...
What else can be said about Ken...he is TOP DRAWER!!!!
TH<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Tim Harr on 16 October 2002 at 06:05 PM.]</p></FONT><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Tim Harr on 16 October 2002 at 06:06 PM.]</p></FONT>
Posted: 18 Oct 2002 11:43 am
by Larry R
Well I must be the odd man out. I play while leaning back against the backrest mainly because of a weak lower back. My legs are tucked well up under the steel. My back gets to hurting if I don't use the backrest.
Go ahead and get the backrest. You'll be glad you did.
Posted: 18 Oct 2002 1:05 pm
by Bryan Knox
Well thanks a lot Tim.
Now that I've seen your seat with that power strip, my Cush-Case seat will be cannibalized tomorrow as I try to fabricate a strip onto it.
Why can't you guys quit giving me these crazy ideas so I can have a Saturday off with my wife and daughter?!?
If you live in Alabama and your lights dim tomorrow afternoon, don't worry. I'm just putting some of those power tools to use I keep getting for Christmas!
------------------
Help prevent juvenile delinquency...teach children to STEEL
Posted: 19 Oct 2002 7:24 am
by Sam Minnitti
Thanks everybody for your advice and opinions. Tim, great photos!
Posted: 22 Oct 2002 12:16 pm
by Bryan Knox
Sam,
Just curious and thought I would follow up. Did you order a seat and did you get one with a backrest?
Tim,
Checked out your websight today and thought it was great. Also, I added power to my seat this weekend. Thanks for sharing the pictures that gave me the idea.
Regards,
Bryan
Posted: 22 Oct 2002 2:53 pm
by Ray Frady
Do they have a website so I can get the prices and options for one of these seats???
If they don't have a website, Does anyone know the prices for these seats???
Thanks,
Ray Frady
Posted: 22 Oct 2002 3:12 pm
by Sam Minnitti
Hi Bryan,
I will be placing the order in a day or two.
I am going with the standard size seat with back. Same color as shown above.
From all the positive comments, it sounds like I will be very pleased with it. I'm sure it will feel like a throne compared to the cheap folding piano bench I am using now.
However, I won’t know until Christmas, it will be a present from my wife, so I will have to wait it out. darn!
Posted: 22 Oct 2002 6:44 pm
by Tim Harr
After talking with Ken Rollans about why he doesn't have a website....
He stated that "If I had a websight, I would be 10 times as busy as I ALREADY AM...building seats"
He just built a new one for Buddy Emmons. I saw Hal Rugg over the weekend and he was sitting on one of Ken's fine seats as well....
Give him a call and see what he has to offer.
Scotty's Music in St Louis (Overland) Missouri has pictures and prices on thier site or, like I said, you could just call Ken himself.
By the way, he is a great steel player too....
Tell 'em Tim sent ya!!!
------------------
Tim Harr - Carter D-10 8 & 9 -
Troy Cook & the Long Haul Band
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Tim Harr on 22 October 2002 at 07:45 PM.]</p></FONT>
Posted: 23 Oct 2002 4:54 am
by Sam Minnitti
Hi Ray,
I emailed you their sell sheet that I got at their booth in St. Louis this year. Let me know if for some reason it did not come through.
Thanks
Posted: 23 Oct 2002 10:22 am
by Ray Frady
I got your email, Sam.
I really appreciate you taking the time to send that to me.
Take Care,
Ray
Posted: 22 Mar 2003 2:25 am
by David L. Donald
Are these seats sold in europe?
I of course would need a different powerstrip for here.
What is the recomended seat height... yes I know this is a can of worms question.
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by David L. Donald on 22 March 2003 at 02:26 AM.]</p></FONT>