Page 1 of 1
Tuning 4th (High E) on older ShoBud
Posted: 9 Mar 2003 11:52 am
by Bruce W Heffner
I am for some reason stumped on this one. On a single raise/lower Sho Bud LDG model how is the F/F# tuned. I notice there are 2 brass tuners on the pull rod for the 4th string. I assume the F# is tuned with the nylon tuner on the endplate; however, perhaps I should not.
Thanks,
Bruce
------------------
www.pedalsteel.net
Posted: 10 Mar 2003 3:31 am
by Craig A Davidson
Bruce, One is for the "F#" change and one is for your "E" to "F" change. You do tune at the endplate for both changes. If I am wrong here will someone stop me? I am sure that's the way.
------------------
1985 Emmons push-pull, Nashville400, 65 re-issue Fender Twin, Fender Tele
Posted: 10 Mar 2003 11:15 pm
by Ricky Davis
Bruce the F to F# and E to F# are tuned with the same tuner at the right end.
When the change is enguaged than it is only enguaging that particular barrel tuner.
Ricky
Posted: 11 Mar 2003 2:57 am
by Craig A Davidson
Thanks Ricky, I wasn't sure how to get that point across. Guess it was easier than I thought.
------------------
1985 Emmons push-pull, Nashville400, 65 re-issue Fender Twin, Fender Tele
Posted: 11 Mar 2003 5:38 pm
by Bruce W Heffner
Thanks guys, I have it under control .....for now.
Bruce
------------------
www.pedalsteel.net