Page 1 of 1
Bar and Pick Holders
Posted: 21 Jul 2004 1:27 am
by Daryl Stogner
Someone on the forum, I saw someone mentioned a little accesory that holds a bar, pick and the end tuning tool, and the thing is attached to the PSG's leg. Looks like some tuibng that slips of the leg, but who knows?
Anyway, I was wondering if anyone knows where I can get one of them. They be handy on breaks.
Daryl
Posted: 21 Jul 2004 1:52 am
by Richard Nydegger
I'm pretty sure Bobbe Seymour has them. I bought the clips from "Scottys" and made one from scrap wood.
Rick
Posted: 21 Jul 2004 5:58 am
by Erv Niehaus
Somebody usually has one for sale on e-bay.
Posted: 21 Jul 2004 7:06 am
by Daryl Stogner
Thanks for the help. Got email to get one from Norm McDaniel down in Waco.
It's not like I couldn't make one myself, not a major project or one of those little somethings the wife wants built, that envolves reframing the freshly remodelled bedroom closet or something! Or was that painting the living room, and then repainting it the following week?
Posted: 21 Jul 2004 9:27 am
by CrowBear Schmitt
Daryl, there's a fellow in Calif. that makes some very nice bar, wrench and pic holders outta different woods, that i find very nice
he sells them on ebay
i've gotten 2 and am quite happy
his ebay user name is "dustyground"
here's a link to one that sold not too long ago:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=3734957699&ssPageName=STRK:MEWA:IT <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by CrowBear Schmitt on 21 July 2004 at 10:29 AM.]</p></FONT>
Posted: 21 Jul 2004 11:33 am
by Daryl Stogner
Crowbear, that's just wha I had in mind. I'll wait and see what Norm is making out in Waco and go from there. Looks I'll get setup with one before long now!
Thanks
Posted: 25 Jul 2004 2:19 am
by CrowBear Schmitt
Posted: 25 Jul 2004 6:34 am
by Daryl Stogner
I just bookmarked that eBay holder for future reference. I found one already through Norm in Waco Texas. Thanks for pointing the eBay one out too.
Daryl
------------------
Daryl Stogner
My email:
daryl@piknsteel.com
My Website:
www.dstogner.com
Dave's Website:
www.davestogner.com
Posted: 2 Aug 2004 6:25 pm
by Larry Moore
Daryl,
I have some I made that holds the Bar and tuning wrench. What size Bar do you have?
I have some 7/8" and 1". What color is your Steel.
I will be in St Louis. We will have a booth at the bottom escalator(Premier Designs Jewelry)next to the Derby Room .
Larry
Posted: 3 Aug 2004 6:52 am
by George McLellan
If I'm not mistaken, Carter makes them also.
------------------
SUAS U' PHIOB
Geo