Page 1 of 1
Sho-Bud permenant changer setup
Posted: 2 Oct 2002 9:24 am
by John Knight
Need a little help from all those ole Sho-Bud owners. I've pulled all the rods off the guitar to do a refinish and I forgot to take notes on how the 9th and 10th string lower tuners go back together. These are the tuning nuts under the guitar.
------------------
D 10 Thomas with 8&6, '61'D-10 Sho-Bud 8&4
S12 Knight 4&4
Nashville 400 and Profex II
81' Fender Twin JBL's
Asleep at the Steel
Posted: 2 Oct 2002 9:27 am
by Bobbe Seymour
NOW YOU HAVE YOUR HANDS FULL!!!
They were ALL different! Good luck.
You can do it. Use your imagination, Shot did.
Posted: 2 Oct 2002 10:17 am
by John Knight
Alrighty then. I can do that. I have all the parts, its just when I put them back on it didn't look right. But I have the principle down to get it to work. Thanks Bobbe
Posted: 3 Oct 2002 4:14 pm
by John Knight
Little help
Posted: 4 Nov 2002 10:44 am
by John Knight
C6th neck is all hooked up and play's nice. As nice as these old guitars play. This was a nice feeling as I had this guitar in complete pieces. E 9th is coming along.
------------------
D 10 Thomas with 8&6, '61'D-10 Sho-Bud 8&4
S12 Knight 4&4
Nashville 400 and Profex II
81' Fender Twin JBL's
Asleep at the Steel