Page 1 of 1

G# to F# pull tuning split to G

Posted: 6 Mar 2014 4:14 pm
by Daniel Showalter
I have a Shobud ProII and have added a knee to lower Strings 3 and 6 1/2 step to G but now want to go all the way to F# on string 6 but can't figure out how to tune the combination with B pedal to get the G There is a set screw on the changer of my Zum for this but there has to be another way without tearing the guitar apart to make that mod
Any ideas?

Posted: 6 Mar 2014 4:34 pm
by Jon Light
There are many threads on the subject. This here shows both methods--your Zum method and the extra rod method (Patrick Laffrat's second graphic). As long as you have an available hole on the changer and the rod & bellcrank, this is what you need.

CLICK

Posted: 6 Mar 2014 6:45 pm
by Keith Currie
I did it with the extra rod on a LDG and it worked out very good.

Re split tuning

Posted: 7 Mar 2014 9:08 am
by Daniel Showalter
OK thanks I had it figured out once but forgot makes sense now just need some parts

Posted: 7 Mar 2014 10:25 am
by Jack Stoner
I was going to put the 3rd string lower, along with the 6th string lower on my Franklin. I was advised not to do it by Mr Franklin (Sr) when he built the guitar. That was 1981, when I ordered the guitar, and I've never missed having it.

I do have the 6th string lower, G# to F# and the split with the B pedal to G. I use both of these changes quite a bit. Probably next to the lever that lowers the E's, the lever that lowers the 6th string is the 2nd most used.

Posted: 7 Mar 2014 10:49 am
by Keith Currie
Same here Jack I like the 6th string lower with the split, He did put the third string lower on mine but I just lower it a half tone and do use that often
The split on the 6th makes it real handy for me, different strokes for different folks I guess.