Page 1 of 1
Sho-Bud Restoration
Posted: 30 Apr 2002 10:42 am
by George King
I have a mid 70s Pro two sho bud that I'd like to have professionaly refinished.Its been carried alot and is getting alot of cracks and checks in the finish.Could anyone give me a name of a competent refinisher.I'm in southern Illinois but I could ship it out.Thanks George
Posted: 30 Apr 2002 12:29 pm
by Darvin Willhoite
I'm restoring an old Emmons with a lacquer finish, and I had Mike Cass handle getting the cabinet refinished and the aluminum polished. Whomever he used did a really good job. Here's his website.
http://hometown.aol.com/pushpulguy/page/MikeCass.htm
------------------
Darvin Willhoite
Riva Ridge Recording
Posted: 30 Apr 2002 1:01 pm
by Jim Eaton
Darvin,
How long did it take for the re-finish on the lacquer Emmons??
JE:-)>
Posted: 30 Apr 2002 5:18 pm
by Kevin Hatton
Duanne Marrs worked 14 years for Sho-Bud. 615-868-5344.
Posted: 1 May 2002 5:48 am
by Terry Wendt
Dick Miller in Joelton, TN is the "cabinet man" or so I've heard from many "TOP NOTCH" steel builders. I have played on one of his cabinets (his steel) and it certainly doesn't get any better - sound - sustain - beauty - you name it - it's grand!
[my opinion]
2pT
------------------
TheEarlyDays.com
and appearing regularly...
Jimmy Crawford/Russ Hicks... and Buddy Emmons on Bass!
aLotOfSpace.com
Posted: 2 May 2002 3:45 pm
by Mark Kelchen
You may want to check with Bobbe Seymour at steelguitar.net Also on his web site, they make reference to restoring guitars. Southern Ill? You're not far from Bobbe's shop either.
Posted: 3 May 2002 1:18 am
by Tony Prior
Yes by all means contact Bobbe Seymour at his store. Bobbe is an amazing encyclopedia reference on Sho-Buds,Emmons, etc.. actually, on ALL steel guitars,( the M xx Guitar too ) he will give the right advise and he has a great supply of parts as well.
And yes , he does full restorations as well, and they look great ! I was lucky enough to be in his store a few weeks back and I did see an old Emmons that had been refinihed in a two tone Nitro Lacquer..It was awesome..
tp<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Tony Prior on 03 May 2002 at 02:20 AM.]</p></FONT>
Posted: 3 May 2002 10:16 am
by Darvin Willhoite
Jim,
I think Mike had the Emmons parts about 5 or 6 weeks. This was last summer and I still don't have it back together, I've had too many projects that took precedence. It's going to look great when it is finished.
------------------
Darvin Willhoite
Riva Ridge Recording
Posted: 3 May 2002 8:31 pm
by Bobbe Seymour
Check our new web-site, several restorations, Sho-Bud and Emmons, No Mxx yet, but we can do anything if the final value permits.
www.steelguitar.net
Posted: 5 May 2002 7:42 am
by Chris DeBarge
Doggone it Bobbe, you and your Sho-Bud guitar porn! That fingertip is one gorgeous instrument.
Posted: 5 May 2002 2:33 pm
by Bobbe Seymour
I can even make an Emmons look good, Check the new site Chris!
www.steelguitar.net
Posted: 12 May 2002 7:37 am
by Bob Cox
One of the hardest phases of restoration is getting the end plates to shine.ShoBud end plates had alot of pitts in them and you can sand to china and not get them out.
Posted: 12 May 2002 10:49 pm
by Roger Shackelton
Hi Bob,
Speaking of pits on Sho-Bud end plates. You should have seen the end plates on Barbara Mandrell's "Jet 14". It looked like someone had peppered it at close range with No. 6 birdshot. I am surprised that guitar left the factory in that condition.
Roger