XLR to 1/8 adapter Question

Andy Sandoval · From: Bakersfield, California, USA

I want to run an adapter cable from my Nashville 112 XLR line out to the line in on the back of my computer, should I use a 1/8 mono or stereo jack?

Jack Stoner · From: Kansas City, MO

The jacks on a PC are stereo. The Line In is a stereo input. As the XLR is a balanced 600 ohm output (Mono signal) you will need an adapter to convert it to a standard high impedance "unbalanced" signal. And then an adapter to the 1/8" stereo.

Steve English · From: Baja, Arizona

If there's a headphone out on the back, I'd try that. The cable would then be a simple 1/4" stereo to 1/8" stereo.
_________________
Always remember you're unique..... Just like everyone else

Forum Index > Recording		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: